학술논문
FDG 합성 후 질소가스를 이용한 튜빙의 잔류 ¹⁸F-FDG 최소화를 위한 방법의 유용성
이용수 0
- 영문명
- A Study on Minimizing the Residual ¹⁸F-FDG in the Tubing Using Nitrogen Gas
- 발행기관
- 대한핵의학기술학회
- 저자명
- 김동일(Dong Il Kim) 박훈(Hoon Park) 석재동(Jae Dong Seok)
- 간행물 정보
- 『핵의학기술』Vol.14 No.1, 8~12쪽, 전체 5쪽
- 주제분류
- 의약학 > 방사선과학
- 파일형태
- 발행일자
- 2010.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
Purpose: In ¹⁸F-FDG automated synthesizer, deliver is done in automated mode after synthesis until the dispenser. After the delivery, the yield is calculated from the radioactivity which was read by the dose calibrator located in the dispenser. However, when the distance between the automated synthesizer and the dispenser is far, there are ¹⁸F-FDG residues, which results in loss of the amount of ¹⁸F-FDG. This study investigated the usefulness of a method that minimizes ¹⁸F-FDG residues. Materials and Methods: The structure of the tubing between the (TRACERlab Mx FDG; GE.) and the dispenser is that the distance is 8 m and the internal diameter is 1/16 inch. The synthesis process of The module goes through the synthesis process of trap, synthesis, delivery in the automated module. The time taken for synthesis is about 25 to 26 minutes, after which rinsing is done. However, after rinsing, as the distance of the tubing increased, there were 10~13% of ¹⁸F-FDG residues. Therefore, a method of using push syringe and N2 gas in manual mode to minimize ¹⁸F-FDG residues is analyzed. Results: In manual mode, there were ¹⁸F-FDG residues of 4~5% for the push syringe, and there were ¹⁸F-FDG residues of less than 1% for the N2 gas, which showed that the method using N2 gas had superior usefulness. Also, there were no ¹⁸F-FDG residues in the cleaning the next day. Conclusion: The distance between the synthesizer and the dispenser needs to be reduced as much as possible, to reduce the rate of loss of ¹⁸F-FDG resulting from the distance of the tubing. However, in case the distance between the synthesizer and the dispenser has to be increased due to the system structure, using push syringe and N2 gas simultaneously is a useful method for minimizing ¹⁸F-FDG residues.
목차
Introduction
Materials and Methods
Results
Conclusion
요약
REFERENCES
해당간행물 수록 논문
- PET/CT 검사에서 호흡에 따른 인공산물을 줄이기 위한 Average CT의 유용성
- 동적 영상 획득 방식을 이용한 정적 영상의 움직임 보정
- 핵의학과 Video Display Terminals Syndrome 유해요인 조사 및 개선에 관한 연구
- ⁹⁹ᵐTc-DTPA를 이용한 사구체 여과율 측정에서 주사 전 선량계수치의 평가
- F-18-FPCIP 뇌 영상에서 True-X 재구성 기법을 기반으로 했을 때의 Iteration과 Subset의 영향
- 한국인 일반인의 혈청 25-Hydroxy Vitamin D₃의 분석
- 이중 에너지 엑스레이 흡수기의 가동 시간에 따른 골밀도 값의 평가
- ²⁰¹Tl을 이용한 레이노 검사에서 동적 Composite 영상의 유용성
- PET/CT 2D와 3D 영상 획득에서 방사능 집적에 따른 방사능 농도의 평가
- 산란보정 전, 후의 SPECT 대조도 및 분해능 평가
- 폐와 심근에서 전이성 석회화가 발견된 골 스캔
- Fusion & Maximum Intensity Projection 3D 재구성 영상에서 Region Cut Subtraction의 유용성
- 반사성교감신경 이영양증후군 환자의 삼상 골 스캔 시 Half Body 혈액 풀 영상의 적용
- FDG 사용 시 Dose Calibrator에 따른 SUV에 미치는 영향
- 통계적 분석을 통한 Insulin의 정상 참고치 설정
- FDG 합성 후 질소가스를 이용한 튜빙의 잔류 ¹⁸F-FDG 최소화를 위한 방법의 유용성
- PET/CT 3차원 영상 획득에서 부분용적효과 감소를 위한 재구성법의 최적화
- Breast Specific Gamma Imaging 장비의 성능평가
- Phytate를 이용한 감시림프절 검사 시 Filter의 유용성 평가
- 전신 뼈 스캔 후 경과 시간 차이에 따른 ²⁰¹Tl 심근관류 SPECT 영상의 영향 평가
- 정적 영상에서 Noise Reduction Software의 이해와 적용
- 감마영상과 실사영상의 Fusion
- 전신 뼈 검사에서 Wide Beam Reconstruction 기법의 유용성
- 서울아산병원의 적혈구 표지 방법에서 교반 시간 차이에 따른 표지 효율의 분석
- 저칼슘혈증 예측지표로서 부갑상선 호르몬 검사반응시간에 따른 유용성
- 고용량 방사성옥소 치료 병실의 최대치 산출
- ⁹⁹ᵐTc-DMSA 신장 검사에서 ROI 설정 방법에 따른 정량분석 차이에 관한 연구
참고문헌
관련논문
의약학 > 방사선과학분야 BEST
- 의료용 인공지능에 대한 동향 분석 및 방사선사 인식조사
- CT contrast 검사 시 중심 정맥관을 이용한 조영제 사용에 대한 연구
- CT조영제 부작용 고위험군에 대한 전처치의 유용성
의약학 > 방사선과학분야 NEW
- 초음파 조직검사에 사용되는 Biopsy Gun Needle의 재질에 따른 반사율 연구
- 방사선에 대한 지식 및 인식도 연구
- 입원환자 일반촬영 이용량 및 피폭선량: 2018년 입원환자데이터
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!