학술논문
펄스 레이저 증착법을 이용한 Zn₁₋ₓMgₓO 박막의 제작과 특성연구
이용수 0
- 영문명
- Preparation and Properties of Zn₁₋ₓMgₓO Thin Films Prepared by Pulsed Laser Deposition Method
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제12권 제1호, 73~76쪽, 전체 4쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2005.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
To widen the band gap of ZnO, we have investigated Zn₁₋ₓMgₓO(ZMO) thin films prepared by pulsed laser deposition on c-plane sapphire substrates at 500℃. From X-ray diffraction patterns, ZMO films show only the (0002) and (0004) diffraction peaks. It means that the flints have the wurtzite structure. Segregation of ZnO and MgO phases is found in the films with x=0.59. All the samples are highly transparent in the visible region and have a sharp absorption edge in the UV region. The shift of absorption edge to higher energy is observed in the films with higher Mg composition. The excitonic nature of the films is clearly appeared in the spectra for all alloy compositions. The optical band-gap (Eg) of ZMO films is obtained from the α² vs Photon energy plot assuming α²∝ (hv - Eg), where u is the absorption coefficient and hv is the photon energy. The value of Eg increases up to 3.72 eV for the films with x=0.35. It is important to adjust Mg composition control for controlling the band-gap of ZMO films.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
참고문헌
해당간행물 수록 논문
- 전기화학적 환원 분석을 통한 무연 솔더 합금의 산화에 대한 연구
- 계면 화학반응과 무전해 니켈 금속층에서 나타나는 취성파괴와의 연관성에 관한 연구
- 고집적용 구리배선의 electromigration 및 thermal fatigue 연구
- 펄스 레이저 증착법을 이용한 Zn₁₋ₓMgₓO 박막의 제작과 특성연구
- Flip Chip Assembly Using Anisotropic Conductive Adhesives with Enhanced Thermal Conductivity
- Quasi-static Analysis on the Effect of the Finite Metal with the Anisotropic Grooved Dielectric in Microstrip Lines
- 박막저항기 특성에 미치는 제조 공정 인자의 영향
- Ti/Cu/Au UBM의 Au 두께와 리플로우 온도에 따른 Sn-52In 솔더와의 계면반응 및 전단 에너지
- Practical Application of Sn-3.0Ag-0.5Cu Lead Free Solder in Electronic Production
- Interfacial Electrical/Dielectric Characterization in Low Temperature Polycrystalline Si
- Technology Computer-Aided Design과 결합된 SPICE를 통한 금속-강유전체-반도체 전계효과 트랜지스터의 전기적 특성 해석
- Tin Pest 방지 솔더합금의 크리프 특성
- Preparation of Field Effect Transistor with (Bi,La)Ti₃O₁₂ Gate Film on Y₂O₃/Si Substrate
- Effect of Microstructure on Alternating Current-induced Damage in Cu Lines
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!