학술논문
Tin Pest 방지 솔더합금의 크리프 특성
이용수 0
- 영문명
- Creep Deformation Behaviors of Tin Pest Resistant Solder Alloys
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제12권 제1호, 47~52쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2005.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
전세계 전자패키지 산업에서 납(Pb) 사용에 대한 환경규제 움직임이 본격화되고 있어 새로운 무연솔더의 개발이 활발히 이루어지고 있다. 게다가 무연솔더의 신뢰성에 대한정보가 아직까지 많이 부족한 실정이다 무연솔더의 신뢰성에 영향을 줄수 있는 것 중의 하나가 Sn pest라고 알려진 동소체 변태이다. Sn pest가 형성될 때 동반되는 부피의 증가는 솔더 조인트의 신뢰성을 저하시킨다. 이미 보고된 바에 따르면, Sn 고용도가 있는 원소(Pb, Bi, Sb)들을 첨가시킬 경우 Sn pest가 효과적으로 억제된다. 그러나 Sn pest를 억제하는 합금에 대한 기계적인 특성에 연구가 거의 이루어지지 않았다. 본 연구에서는 Sn과 Sn-0.7Cu를 기반으로 하여 Bi, Sb을 첨가한 솔더 합금을 사용하여 lap shear크리프 실험을 하였다. 본 연구에서 사용한 합금들의 변형율은 전체적으로 Sn-3.5Ag를 기반으로 하는 합금들보다 높았다. 파괴까지 이르는 변형량은 Sn-0.5Bi가 가장 크고 Sn-0.7Cu-0.5Sb 합금이 가장 작았는데 이러한 경향은 Sn-0.5Bi 합금의 파단면에 Sn globules이 길게 늘어나 있고 Sn-0.7Cu-0.5Sb 합금에서는 더 짧은 Sn globules 이 관찰되는 결과와 일치하였다.
영문 초록
Worldwide movement for prohibition of Pb usage drives imminent implementation of Pb-free solders in microelectronic packaging industry. Reliability information of Pb-free solders has not been completely constructed yet. One of the potential reliability concerns of Pb-free solders is allotropic transformation of Sn known as tin pest. Volume increase during the formation of tin pest could deteriorate the reliability of solder joints. It was also reported that the addition of soluble elements (i.e. Pb, Bi, and Sb) into Sn can effectively suppress the tin pest. However, the mechanical properties of the tin pest resistant alloys have not been studied in detail. In this study, lap shear creep test was conducted with Sn and Sn-0.7Cu based solder alloys doped with minor amount of Bi or Sb. Shear strain rates of the alloy were generally higher than those of Sn-3.5Ag based alloys. Rupture strains and corresponding Monkman- Grant products were largest for Sn-0.5Bi alloy and smallest for Sn-0.7Cu-0.5Sb alloy. Rupture surface Sn-0.5Bi alloy showed highly elongated β-Sn globules necked to rupture by shear stresses, while elongation of β-Sn globules of Sn-0.7Cu-0.5Sb alloy was relatively smaller.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- 전기화학적 환원 분석을 통한 무연 솔더 합금의 산화에 대한 연구
- 계면 화학반응과 무전해 니켈 금속층에서 나타나는 취성파괴와의 연관성에 관한 연구
- 고집적용 구리배선의 electromigration 및 thermal fatigue 연구
- 펄스 레이저 증착법을 이용한 Zn₁₋ₓMgₓO 박막의 제작과 특성연구
- Flip Chip Assembly Using Anisotropic Conductive Adhesives with Enhanced Thermal Conductivity
- Quasi-static Analysis on the Effect of the Finite Metal with the Anisotropic Grooved Dielectric in Microstrip Lines
- 박막저항기 특성에 미치는 제조 공정 인자의 영향
- Ti/Cu/Au UBM의 Au 두께와 리플로우 온도에 따른 Sn-52In 솔더와의 계면반응 및 전단 에너지
- Practical Application of Sn-3.0Ag-0.5Cu Lead Free Solder in Electronic Production
- Interfacial Electrical/Dielectric Characterization in Low Temperature Polycrystalline Si
- Technology Computer-Aided Design과 결합된 SPICE를 통한 금속-강유전체-반도체 전계효과 트랜지스터의 전기적 특성 해석
- Tin Pest 방지 솔더합금의 크리프 특성
- Preparation of Field Effect Transistor with (Bi,La)Ti₃O₁₂ Gate Film on Y₂O₃/Si Substrate
- Effect of Microstructure on Alternating Current-induced Damage in Cu Lines
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!