학술논문
고집적용 구리배선의 electromigration 및 thermal fatigue 연구
이용수 0
- 영문명
- Electromigratoin and thermal fatigue in Cu mentallization for ULSI
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제12권 제1호, 53~58쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2005.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
구리 배선에서의 신뢰성 평가를 위해 직류전류와 교류전류를 각각 인가하였을 때의 파손 발생을 분석해 보았다. 직류 전류에서는 electromigration 현상이 발생하는데, 높은 전류 밀도와 온도에서 더욱 빠르게 파손이 진행되었으며, 실험을 통해 구한 활성화 에너지와 전류밀도 의존지수는 각각 0.96eV와 4의 값을 갖는 것으로 나타났다. 교류 전류에서는 열 피로 현상이 발생하였는데, 높은 주파수와 ΔT가 클수록 파손이 심하게 진행되었다. 집합 조직에 따른 failure morphology분석 결과, (100)grains에서는 결함이 넓게 성장하여 facetted grains가 되지만 (111)에서는 배선의 두께 방향으로 성장하여 빠르게 단선을 유발하는 것으로 나타났다.
영문 초록
We researched damage formation and failure mechanism under DC(direct current) and AC(alternative current) in order to estimate reliability of Cu interconnects in ULSI. Higher current density and temperature induces more short TTF(time to failure) during interconnects carry DC. Measurement reveals that Cu electromigration has activation energy of 0.96eV and current density exponent value of 4. Thermal fatigue is occurred under DC, and higher frequency and ΔT value gives more severe damage during interconnects carry AC Through failure morphology analysis with respect to texture, we observed that damages had grown widely and facetted grains had appeared in (100)grain but damages in (111) had grown thickness direction of line and had induced a failure rapidly.
목차
1. 서론
2. 실험 방법
3. 실험결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- 전기화학적 환원 분석을 통한 무연 솔더 합금의 산화에 대한 연구
- 계면 화학반응과 무전해 니켈 금속층에서 나타나는 취성파괴와의 연관성에 관한 연구
- 고집적용 구리배선의 electromigration 및 thermal fatigue 연구
- 펄스 레이저 증착법을 이용한 Zn₁₋ₓMgₓO 박막의 제작과 특성연구
- Flip Chip Assembly Using Anisotropic Conductive Adhesives with Enhanced Thermal Conductivity
- Quasi-static Analysis on the Effect of the Finite Metal with the Anisotropic Grooved Dielectric in Microstrip Lines
- 박막저항기 특성에 미치는 제조 공정 인자의 영향
- Ti/Cu/Au UBM의 Au 두께와 리플로우 온도에 따른 Sn-52In 솔더와의 계면반응 및 전단 에너지
- Practical Application of Sn-3.0Ag-0.5Cu Lead Free Solder in Electronic Production
- Interfacial Electrical/Dielectric Characterization in Low Temperature Polycrystalline Si
- Technology Computer-Aided Design과 결합된 SPICE를 통한 금속-강유전체-반도체 전계효과 트랜지스터의 전기적 특성 해석
- Tin Pest 방지 솔더합금의 크리프 특성
- Preparation of Field Effect Transistor with (Bi,La)Ti₃O₁₂ Gate Film on Y₂O₃/Si Substrate
- Effect of Microstructure on Alternating Current-induced Damage in Cu Lines
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!