학술논문
ADDIE 모형에 터한 창의 공학 설계 교육 프로그램 모형 개발과 적용 방안
이용수 429
- 영문명
- Model Development and Application of Creative Engineering Design Education Program Based on ADDIE Model
- 발행기관
- 한국기술교육학회
- 저자명
- 이창훈(Chang Hoon Lee)
- 간행물 정보
- 『한국기술교육학회지』제8권 제1호, 131~146쪽, 전체 16쪽
- 주제분류
- 사회과학 > 교육학
- 파일형태
- 발행일자
- 2008.06.30
4,720원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
이 연구의 목적은 창의 공학 설계 교육 프로그램의 모형을 구안하여 체계적이고 효과적인 창의 공학 설계 교육 프로그램 개발을 위한 기초 자료를 제시함에 있다. 이를 위하여 문헌 고찰 및 전문가 협의를 통하여 ADDIE 모형에 터한 창의 공학 설계 교육 프로그램 모형을 개발하였으며, 개발된 모형에 대하여 전문가 집단의 타당도를 검증받았다.
ADDIE 모형에 터하여 개발된 창의 공학 설계 교육 프로그램 모형은 다음과 같다. 첫째, 창의 공학 설계 교육 프로그램을 개발하기 위한 모형은 분석, 설계, 개발, 실행, 평가의 기본적인 5개 단계를 따른다.
둘째, 분석 단계의 하위 요소는 프로그램 개발 전문가 팀 구성, 창의 공학 설계 교육 자료 분석, 창의 공학 설계 교육 프로그램의 기본 방향 설정, 창의 공학 설계 교육 프로그램의 교육 목적 및 목표 설정, 창의 공학 설계 교육 내용 선정 등으로 구성된다.
셋째, 설계 단계의 하위 요소는 프로그램 내용의 계열화, 교육 프로그램 내용에 따른 목표 설정, 교육 프로그램 내용에 따른 교수-학습 전략 탐색 등으로 구성된다.
넷째, 개발 단계의 하위 요소는 교수-학습 과정안 개발, 창의 공학 설계 교재 개발 등으로 구성된다.
다섯째, 실행 단계의 하위 요소는 학습자 관리, 교육자 관리, 교육 자료 관리, 교육 환경 관리 등으로 구성된다.
여섯째, 평가 단계의 하위 요소는 평가 목적 설정, 평가 영역 확인, 평가 도구 제작, 평가 실행 등으로 구성된다.
끝으로, 창의 공학 설계 교육 프로그램 개발 모형의 분석, 설계, 개발, 실행, 평가의 단계는 직선적이 아닌 상호 유기적으로 연관되어 있다.
영문 초록
This study aims to present basic materials for developing a systematic and effective creative engineering design education(CEDE) program by devising a model of CEDE program. The CEDE program model based on the ADDIE model was devised by the document research and the consultation with experts. Also, the reliability on this model has been verified by experts.
The CEDE program model based on the ADDIE model is below.
First, the model to develop the CEDE program follows five basic stages: analysis, design, development, implementation, and evaluation.
Second, the subordinate factors of the analysis stage consist of forming expert a team developing program, setting the basic direction in the CEDE program, setting the educational objective and target of the CEDE program, and selecting the contents of creative engineering education.
Third, the subordinate factors of the design stage are the systematization of the program contents, setting the purpose following the education program contents and the search for teaching-learning strategies following the education program contents.
Fourth, the subordinate factors of the development stage consist of developing teaching-learning curriculum, and developing creative engineering design materials.
Fifth, the subordinate factors of the implementation stage are supervising learners, supervising teachers, supervising teaching materials, and supervising the teaching environment.
Sixth, the subordinate factors of evaluation are setting the objective of evaluation, checking the evaluation category, producing tools for evaluation and performing the evaluation.
Lastly, the five stages of the CEDE program model; analysis, design, development, implementation and evaluation are organically interrelated.
목차
I. 서론
II. 이론적 배경
III. 창의 공학 설계 교육 프로그램 개발 모형
IV. 결론 및 제언
키워드
해당간행물 수록 논문
- A Case Study on Learner-oriented CBE program
- ADDIE 모형에 터한 창의 공학 설계 교육 프로그램 모형 개발과 적용 방안
- 기술 교과 예비 교사를 대상으로 한 운동물체 만들기 프로젝트 사례
- 뇌 기능 분화에 기반한 공업계 고등학교 전기회로 교과서 내용의 분석
- 청주지역의 남향 고정식 태양전지모듈의 연간 최대 전력량 분석
- 대학 e러닝 환경에서 수업성공에 영향을 미치는 학습자 특성에 관한 연구
- 발명·특허 특성화고 학생의 진로 유형과 이에 대한 담당 교사의 인식
- 중학교 기술·가정 교과 전기·전자 기술 단원의 용어에 대한 학생 인식
- 중소기업 기술 인력의 경쟁력 제고를 위한 공업계 고교의 역할과 직업교육의 방향
- 기술교육에서 기술적 문제의 유형에 터한 통신기술 체험활동 과제의 개발
- 통합형고등학교의 교육과정 운영 및 교육성과에 대한 만족도 조사
- 『KICE 교수학습 개발센터』 교수학습 자료 운영 요구 분석
- 확산적 사고 기반 투상 제도 기법을 활용한 제도 교수-학습 자료 및 교육 과정 개발
- 기술영향평가에 대한 개념 및 영역의 탐색
- 기술 교과에서 기술적 창조성 교육 방안에 관한 선행 연구 분석
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!