학술논문
금속기판에 유전체 후막을 형성시켜 제조한 2층 층상재료에서 두께 방향의 열전도 특성
이용수 0
- 영문명
- Thermal Properties of Two-Layered Materials Composed of Dielectric Layer on Metallic Substrate along the Thickness Direction
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제23권 제4호, 87~92쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2016.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
전자소자의 방열모듈에서 두께 방향의 열방출 특성에 대한 중요성이 증가하고 있다. 금속과 금속의 본딩 및 유전체와 금속의 본딩 구조를 갖는 2가지 종류의 2층 층상재료를 제조한 후 두께 방향으로 열확산계수를 측정하였다. 금속(STS439)과 금속(Al6061)으로 이루어진 2층 층상재료에서는 섬광법(LFA)으로 열확산계수를 측정했을 때, 열흐름의 방향을 반대로 변화시켜도 열확산계수의 변화가 없었다. 그런데, 유전체(AlN-Polymer)와 금속(Al6061)의 2층 층상재료에서는 열흐름의 방향을 반대로 인가하였을 때 열확산계수는 17.5% 정도 다르게 나타났다. 유전체와 금속의 단면구조를 갖는 2층 층상재료에서, 금속에서 유전체 방향으로 측정한 열확산계수가 유전체에서 금속 방향으로 측정한 열확산계수에 비해 17.5% 작게 나타난 이유는, 금속내의 전자가 갖고 있던 에너지가 유전체 쪽으로 전달되기 위해서는 계면 주변에서 포논의 에너지 형태로 변환될 때 저항이 생기기 때문이다.
영문 초록
The importance of heat dissipation for the electric device modules along the thickness direction is increasing. Two types of two-layered materials, metal-metal bonding and dielectric-metal bonding, have been fabricated by roll bonding process and a thermal diffusivity of the specimens was measured along the thickness direction. The thermal diffusivity of specimens with metal-metal bonding measured by light flash analysis (LFA) showed a same value independent on the direction of heat flow. However, the thermal diffusivity of specimens with dielectric-metal bonding showed a big difference of 17.5% when the direction of heat flow changed oppositely in the LFA process. The measured thermal diffusivity of specimens when the heat flows from metal to dielectric direction showed smaller value of 17.5% compared to the value when the heat flow from dielectric to metal direction. The difference in thermal diffusivity of specimens with dielectric-metal bonding dependence on direction of heat flow is due to the electron-phonon resistance that occurred transfer process of electron energy to phonon energy near the interface.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
References
해당간행물 수록 논문
- MnO2 조촉매가 코팅된 GaN 광전극의 광전기화학적 특성
- 금속기판에 유전체 후막을 형성시켜 제조한 2층 층상재료에서 두께 방향의 열전도 특성
- 아산화동과 황산간의 고속 화학반응에 의한 미세 Cu 입자의 합성과 삼본밀에 의한 분산성 개선
- 액적 충돌 거동에 대한 표면 패턴의 영향에 관한 연구
- Preparation and Photoluminescent Properties ofCa₂PO₄Cl Activated by Divalent Europium
- 웨어러블 스마트기기의 표준화 및 시험인증 연구
- Magnetic and Thermal Evaluation of a Magnetic Tunneling Junction Current Sensor Package
- 가시광통신을 이용한 로봇 위치확인 시스템
- 세라믹-금속 기반 LED 어레이 패키지의 저온동시소성시 휨발생 억제 연구
- Nano-Scale Cu Direct Bonding Technology Using Ultra-High Density, Fine Size Cu Nano-Pillar (CNP) for Exascale 2.5D/3D Integrated System
- Characteristics of Cr(III)-based Conversion Coating Solution to Apply Aluminum Alloys for Improving Anti-corrosion Properties
- NaS 배터리 셀 패키지의 알루미나 컴포넌트 접합용 Sealing Glass의 기공율 제어
- 유연기판 위에 제작된 Silver Nanowire 필름의 기계 및 전기적 신뢰성 연구
- Recent Progress in Electroless Plating of Copper
- 355nm 펄스 레이저를 이용한 구리 표면의 소수성 개질에 관한 연구
- Silicon 기반 IC 디바이스에서의 층간 절연막 특성 분석 연구
- OLED공정에서 사용되는 섀도마스크의 습식 세정 후 세정표면 및 세정용액 분석에 관한 연구
- 5 nm 급 반도체 배선 공정 기술 개발
- Leadframe SiP with Conformal Shield
- Double Side SMT and Molding Process Development for mPossum Package
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!