학술논문
세라믹-금속 기반 LED 어레이 패키지의 저온동시소성시 휨발생 억제 연구
이용수 0
- 영문명
- Low Temperature Co-firing of Camber-free Ceramic-metal Based LED Array Package
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제23권 제4호, 35~41쪽, 전체 7쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2016.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
고출력 LED 조명용 패키지를 제조함에 있어서 발열은 LED의 광출력과 수명에 매우 중요한 영향을 주는 인자로 알려져 있다. 본 연구에서는 가로등용 고출력 LED 패키지를 개발함에 있어서 효과적인 방열을 하기 위하여 방열효과가 상대적으로 우수한 구조인 chip-on-a-heat sink 구조를 가지는 세라믹-메탈 기반의 패키지를 제조하였다. 열확산 기능을 하는 heat sink 기판소재는 알루미늄 합금을, LED 어레이 회로를 형성하는 절연막으로는 저온동시소성용 glass-ceramics을 사용하였다. 특히 열처리 시 가장 이슈가 되는 세라믹-금속 하이브리드 패키지 기판의 휨을 억제하기 위한 수단으로서, glass-ceramic 절연막을 부분 코팅함으로써 휨현상을 용이하게 줄일 수 있게 되었다. 또한, LED 패키지의 방열특성의 향상 즉 열저항도 기존의 MCPCB 패키지나 전면 코팅형 절연막 패키지에 비해 훨씬 낮아지는 효과를 얻었을 뿐 아니라, 세라믹 코팅소재의 절감효과도 볼 수 있게 되었다.
영문 초록
Ceramic-metal based high power LED array package was developed via thick film LTCC technology using a glass-ceramic insulation layer and a silver conductor patterns directly printed on the aluminum heat sink substrate. The thermal resistance measurement using thermal transient tester revealed that ceramic-metal base LED package exhibited a superior heat dissipation property to compare with the previously known packaging method such as FR-4 based MCPCB. A prototype LED package sub-module with 50 watts power rating was fabricated using a ceramic-metal base chip-on-a board technology with minimized camber deformation during heat treatment by using partially covered glass-ceramic insulation layer design onto the aluminum heat spread substrate. This modified circuit design resulted in a camber-free packaging substrate and an enhanced heat transfer property compared with conventional MCPCB package. In addition, the partially covered design provided a material cost reduction compared with the fully covered one.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
Acknowledgements
References
해당간행물 수록 논문
- MnO2 조촉매가 코팅된 GaN 광전극의 광전기화학적 특성
- 금속기판에 유전체 후막을 형성시켜 제조한 2층 층상재료에서 두께 방향의 열전도 특성
- 아산화동과 황산간의 고속 화학반응에 의한 미세 Cu 입자의 합성과 삼본밀에 의한 분산성 개선
- 액적 충돌 거동에 대한 표면 패턴의 영향에 관한 연구
- Preparation and Photoluminescent Properties ofCa₂PO₄Cl Activated by Divalent Europium
- 웨어러블 스마트기기의 표준화 및 시험인증 연구
- Magnetic and Thermal Evaluation of a Magnetic Tunneling Junction Current Sensor Package
- 가시광통신을 이용한 로봇 위치확인 시스템
- 세라믹-금속 기반 LED 어레이 패키지의 저온동시소성시 휨발생 억제 연구
- Nano-Scale Cu Direct Bonding Technology Using Ultra-High Density, Fine Size Cu Nano-Pillar (CNP) for Exascale 2.5D/3D Integrated System
- Characteristics of Cr(III)-based Conversion Coating Solution to Apply Aluminum Alloys for Improving Anti-corrosion Properties
- NaS 배터리 셀 패키지의 알루미나 컴포넌트 접합용 Sealing Glass의 기공율 제어
- 유연기판 위에 제작된 Silver Nanowire 필름의 기계 및 전기적 신뢰성 연구
- Recent Progress in Electroless Plating of Copper
- 355nm 펄스 레이저를 이용한 구리 표면의 소수성 개질에 관한 연구
- Silicon 기반 IC 디바이스에서의 층간 절연막 특성 분석 연구
- OLED공정에서 사용되는 섀도마스크의 습식 세정 후 세정표면 및 세정용액 분석에 관한 연구
- 5 nm 급 반도체 배선 공정 기술 개발
- Leadframe SiP with Conformal Shield
- Double Side SMT and Molding Process Development for mPossum Package
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!