학술논문
유연 InGaP/GaAs 2중 접합 태양전지 모듈의 신뢰성 확보를 위한 실험 및 수치 해석 연구
이용수 3
- 영문명
- Reliability Assessment of Flexible InGaP/GaAs Double-Junction Solar Module Using Experimental and Numerical Analysis
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제26권 제4호, 75~82쪽, 전체 8쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2019.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
유연 태양 전지는 최근 휴대용 배터리, 웨어러블 소자, 로봇, 드론 및 비행기와 같은 광범위한 응용 분야로 인해 큰 주목을 받고 있다. 특히, 고효율 및 높은 신뢰성을 갖는 유연 실리콘 및 화합물 반도체 태양 전지의 요구가 계속 증가하고 있다. 본 연구에서는 유연 InGaP/GaAs 2중 접합 태양전지 모듈을 개발하였다. 특히 제작된 유연 태양전지 모듈의 신뢰성을 확보하기 위하여, 풍속 및 주위 온도가 태양 전지 작동 온도에 미치는 영향을 수치해석으로 분석하였다. 3종류의 풍속(0 m/s, 2.5 m/s 및 5 m/s) 및 2종류의 주변 온도 조건(25℃ 및 33℃)에 대하여 태양 전지 모듈의 온도 분포를 해석하였다. 유연 태양전지 모듈의 유연성은 굽힘 시험 및 굽힘 수치해석을 통하여 평가하였다. 25℃ 온도조건에서 풍속이 0 m/s 일 때, 태양 전지 셀의 최대 온도는 149.7℃이다. 풍속이 2.5 m/s로 증가되었을 경우, 태양 전지의 온도는 66.2℃로 크게 감소되었다. 또한 풍속이 5 m/s 인 경우, 태양 전지의 온도는 48.3℃로 급격히 감소함을 알 수 있었다. 주변 온도 또한 태양 전지의 작동 온도에 영향을 미친다. 2.5 m/s의 풍속에서 주변 온도가 33℃로 증가할 경우, 태양 전지의 온도는 74.2℃로 약간 증가하였다. 따라서 태양 전지 셀의 온도에 영향을 미치는 가장 중요한 인자는 풍속으로 인한 열 방출 효과임을 알 수 있었다. 또한 태양 전지의 최대 온도는 사용된 소재들의 유리 전이 온도보다 낮기 때문에, 열 변형 및 모듈의 열화 가능성은 매우 낮을 것으로 예측된다. 제작된 태양전지 모듈은 굽힘 반경 7 mm까지 굽힐 수 있어 비교적 우수한 유연성을 갖고 있었다. 또한 향후 neutral plane 해석을 통하여 태양전지 셀을 neutral plane에 위치시키면 유연성이 크게 증가할 것으로 예측된다.
영문 초록
Flexible solar cells have attracted enormous attention in recent years due to their wide applications such as portable batteries, wearable devices, robotics, drones, and airplanes. In particular, the demands of the flexible silicon and compound semiconductor solar cells with high efficiency and high reliability keep increasing. In this study, we fabricated a flexible InGaP/GaAs double-junction solar module. Then, the effects of the wind speed and ambient temperature on the operating temperature of the solar cell were analyzed with the numerical simulation. The temperature distributions of the solar modules were analyzed for three different wind speeds of 0 m/s, 2.5 m/s, and 5 m/s, and two different ambient temperature conditions of 25℃ and 33℃. The flexibility of the flexible solar module was also evaluated with the bending tests and numerical bending simulation. When the wind speed was 0 m/s at 25 ℃, the maximum temperature of the solar cell was reached to be 149.7℃. When the wind speed was increased to 2.5 m/s, the temperature of the solar cell was reduced to 66.2℃. In case of the wind speed of 5 m/s, the temperature of the solar cell dropped sharply to 48.3℃. Ambient temperature also influenced the operating temperature of the solar cell. When the ambient temperature increased to 33℃ at 2.5 m/s, the temperature of the solar cell slightly increased to 74.2℃ indicating that the most important parameter affecting the temperature of the solar cell was heat dissipation due to wind speed. Since the maximum temperatures of the solar cell are lower than the glass transition temperatures of the materials used, the chances of thermal deformation and degradation of the module will be very low. The flexible solar module can be bent to a bending radius of 7 mm showing relatively good bending capability. Neutral plane analysis was also indicated that the flexibility of the solar module can be further improved by locating the solar cell in the neutral plane.
목차
1. 서론
2. 태양전지 모듈 제작 및 실험 방법
3. 수치해석 모델링
4. 결과 및 고찰
5. 결론
감사의 글
References
해당간행물 수록 논문
- Growth of α-Ga2O3 Epitaxial Films on Al2O3 by Halide Vapor Pressure Epitaxy
- 파워모듈의 TLP 접합 및 와이어 본딩
- 수치해석을 이용한 판넬과 스트립 및 유닛 레벨 반도체 패키지용 PCB의 열변형 해석
- 나노 잔류응력 측정을 위한 비등방 압입자의 깊이별 응력환산계수 분석
- 고상반응법에 의한 LiBaPO4:Eu2+ 계 형광체의 제조 및 광 발광 특성
- 금속 나노와이어 기반 전극 기술 개발 동향
- Island-Bridge 구조의 강성도 경사형 신축 전자패키지의 유효 탄성계수 및 변형거동 분석
- 온도 및 압축응력 변화에 따른 PIN-PMN-PT 단결정의 유전 및 압전 특성
- PMN-PT 단결정의 압전 및 유전 특성 평가에 미치는 측정 방법의 영향
- PDMS로 충진된 신축열전모듈의 신축특성과 발전특성
- 전해 Cr/Ni-P 도금막의 열 사이클 신뢰성 및 균열거동 분석
- PDMS 기반 강성도 경사형 신축 전자패키지의 신축변형-저항 특성
- 세라믹-세라믹 컴포넌트 접합용 글라스 실란트의 제조 및 접합력 평가
- 유연 InGaP/GaAs 2중 접합 태양전지 모듈의 신뢰성 확보를 위한 실험 및 수치 해석 연구
- Carbon Nanotube Passivation layer for Increasing the Solar Water Splitting Performance of CdS/CuInGaSe Photocathode
- OSP 표면처리된 FR-4 PCB기판과 Sn58%Bi 복합솔더 접합부의 미세조직 및 접합강도에 미치는 Sn-MWCNT의 영향
- 열전소재 성능 증대를 위한 점결함 제어 전략
- Trimethylsilyl Chloride를 Silylation Agent로 사용한 Ba0.6Sr0.4TiO3 나노입자의 표면개질 연구
- 이차전지 전극용 Al-Cu의 레이저 용접
- 하이브리드 필러를 함유한 에폭시 복합체의 열적 특성 연구
- 강성도 경사형 신축 전자패키지의 탄성특성 및 반복변형 신뢰성
- PDMS 충진법을 이용하여 형성한 유연열전모듈의 발전특성과 굽힘특성
- 휨을 고려한 칩 패키지의 EMC/PCB 계면 접합 에너지 측정
- LED 광을 이용한 그림자 무아레 방법의 감도 향상 및 모바일 전자 기판의 변형 측정
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!