학술논문
진동기구의 SAE 5155강재 부식에 따른 압축 잔류응력의 영향
이용수 0
- 영문명
- The Effects of Compressive Residual Stress by Corrosion a SAE5155 Steel Vibrating Apparatus
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 박재정(Jae Jung Park)
- 간행물 정보
- 『산업기술연구논문지』산업기술교육훈련논문지 제20권 3호, 111~118쪽, 전체 8쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2015.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
A study of corrosive environment under shot peening processing, compressive residual stress formed within materials interacts with growth stress due to corrosion progress. This causes long time of protective coating formation and subsequent higher resistance of corrosion than un peening materials. Corrosion fatigue crack growth rate in each corrosive solution as a whole was lower for shot peening than un peening. This is regarded that the compressive residual stress acts as harness and slows down fatigue crack growth rate. Threshold stress intensity factor in the corrosive environment was lower under corrosive environment than at room temperature. This is regarded that in the range of low frequency stress intensity factor at the crack tip acts as a partial electrochemical corrosion and the growth of fatigue crack progress rate shows a low value. Fatigue life at room temperature is 453 percent higher for shot peening specimen than un peening specimen. The percentage was 294, 488 366 higher under corrosive environment of 6% FeCl3 solution, 10% HNO3 + 3% HF solution, 3.5% NaCl in aqueous solution respectively. The results indicate shot peening effects is high for critical corrosion.
목차
ABSTRACT
Ⅰ. 서론
Ⅱ. 시험편 및 실험방법
Ⅲ. 실험결과 및 고찰
Ⅳ. 결론
참고문헌
해당간행물 수록 논문
- 자유곡면 모델을 이용한 황삭 가공용 NC 데이터 생성에 관한 연구
- 진동기구의 SAE 5155강재 부식에 따른 압축 잔류응력의 영향
- 선박통합정보시스템을 위한 가상화 도입 방안에 대한 연구
- 무기물 입자를 사용한 폴리프로필렌 수지의 물성 개선에 대한 연구
- GAIN 값 변화에 강인하게 개선된 PID 제어기
- 임베디드 시스템 코드 재사용성에 대한 연구
- 항공기 계기 착륙 실습 장치 설계
- 로봇 제어기를 위한 멀티키패드 회로 디자인에 대한 연구
- Solid Wire와 Flux Cored Wire의 용접에 따른 탄소강(SS400)의 기계적 특성
- 증기분사식 진공냉동기의 특성에 관한 실험적 연구
- 재킷 두 장 소매에 관한 연구
- 매뉴얼라인 분석을 통한 작업개선 프로세스
- 다중 로봇을 이용한 선박 객실 진동의 능동 제어 기법 연구
- 오스테나이트계 스테인리스 주강에서 합금원소가 크랙에 미치는 영향
- 플랫디자인 적용에 따른 웹사이트 감성 효과 연구
- G-type 개질 알지네이트 섬유제조 및 특성
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!