학술논문
Solid Wire와 Flux Cored Wire의 용접에 따른 탄소강(SS400)의 기계적 특성
이용수 14
- 영문명
- Mechanical Properties of the Solid Wire and Flux Cored Wire due to the Welding of Carbon Steel(SS400)
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 김종택(Jong Taek Kim)
- 간행물 정보
- 『산업기술연구논문지』산업기술교육훈련논문지 제20권 3호, 105~110쪽, 전체 6쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2015.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
This study analyzed the mechanical properties by tensile test after CO2 gas welding with solid wire and flux cored wire on the general structural rolled steel(SS400) were obtained as follows. The solid wire indicated more excellent result then the flux cored wire in the elongation distance and the sensitivity shows a similar result. As seen from the average value of the elastic limit, the solid wire shows a slightly better result and the yield point represents a similar result. Solid wire indicates a good value than the flux cored wire but shows a slight variation. Seen in this, it cannot protect the welding zone because solid wire welding does not produce slag after welding, on the other hand, it is considered to represent a reliable result because the slag after welding with flux cored wire can protect the welding zone.
목차
ABSTRACT
Ⅰ. 서론
Ⅱ. 재료 및 방법
Ⅲ. 결과 및 고찰
Ⅳ. 결론
참고문헌
해당간행물 수록 논문
- 자유곡면 모델을 이용한 황삭 가공용 NC 데이터 생성에 관한 연구
- 진동기구의 SAE 5155강재 부식에 따른 압축 잔류응력의 영향
- 선박통합정보시스템을 위한 가상화 도입 방안에 대한 연구
- 무기물 입자를 사용한 폴리프로필렌 수지의 물성 개선에 대한 연구
- GAIN 값 변화에 강인하게 개선된 PID 제어기
- 임베디드 시스템 코드 재사용성에 대한 연구
- 항공기 계기 착륙 실습 장치 설계
- 로봇 제어기를 위한 멀티키패드 회로 디자인에 대한 연구
- Solid Wire와 Flux Cored Wire의 용접에 따른 탄소강(SS400)의 기계적 특성
- 증기분사식 진공냉동기의 특성에 관한 실험적 연구
- 재킷 두 장 소매에 관한 연구
- 매뉴얼라인 분석을 통한 작업개선 프로세스
- 다중 로봇을 이용한 선박 객실 진동의 능동 제어 기법 연구
- 오스테나이트계 스테인리스 주강에서 합금원소가 크랙에 미치는 영향
- 플랫디자인 적용에 따른 웹사이트 감성 효과 연구
- G-type 개질 알지네이트 섬유제조 및 특성
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!