학술논문
로봇 제어기를 위한 멀티키패드 회로 디자인에 대한 연구
이용수 12
- 영문명
- A Study on a Multi-keypad Circuit Design of Robot Controllers
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 류대우(Dae Woo Ryu) 김현강(Hyun Kang Kim) 최우영(Woo Young Choi)
- 간행물 정보
- 『산업기술연구논문지』산업기술교육훈련논문지 제20권 3호, 93~98쪽, 전체 6쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2015.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
This paper presented a method of design of multi-keypad which supports sensing of any multi key pressing. Traditionally, 4x4 keypad used in many applications has not been supported for multi-pressing, so some key pressing combinations could not be identified. Because user could not know the special key pressing, so keypad circuit design has been hidden issues between the hardware engineer and software engineer. If hardware designer do not consider the power dissipation when designing keypad circuit, CPU or other parts of circuits could be hot if pressed long time, so MCU (Microcontroller Unit) could be broken after some time, and naturally it would spends many power of mobile devices. Some circuits could make big noise to CPU, so they could not always sense the same way as designed. Noise signals caused by capacitance of forward biased diode could make the sensing speed slower and excessive sensing voltage. To support multi-keypad sensing, special keypad circuit has been developed to solve every key sensing problems, battery consumption, and noise problems. To verify the effectiveness of sensing of multi-keypad, testing program was developed with Atmel AVR, Renesas RL78, and Cortex-M3 ARM MCU of STMicroelectronics. With this circuit and testing program, special multi-keypad circuit proved to sense every key combination, minimized noise, and low power consumption. This was precisely intended for multi keypad in noisy and harsh environments between robot and its controllers. The “Multi-keypad” was tested successfully to prove its applicability with testing program.
목차
ABSTRACT
Ⅰ. Introduction
Ⅱ. Target problem
Ⅲ. Experimental results
Ⅳ. Test materials and test
Ⅴ. Test results
Ⅵ. Conclusions
Reference
해당간행물 수록 논문
- 자유곡면 모델을 이용한 황삭 가공용 NC 데이터 생성에 관한 연구
- 진동기구의 SAE 5155강재 부식에 따른 압축 잔류응력의 영향
- 선박통합정보시스템을 위한 가상화 도입 방안에 대한 연구
- 무기물 입자를 사용한 폴리프로필렌 수지의 물성 개선에 대한 연구
- GAIN 값 변화에 강인하게 개선된 PID 제어기
- 임베디드 시스템 코드 재사용성에 대한 연구
- 항공기 계기 착륙 실습 장치 설계
- 로봇 제어기를 위한 멀티키패드 회로 디자인에 대한 연구
- Solid Wire와 Flux Cored Wire의 용접에 따른 탄소강(SS400)의 기계적 특성
- 증기분사식 진공냉동기의 특성에 관한 실험적 연구
- 재킷 두 장 소매에 관한 연구
- 매뉴얼라인 분석을 통한 작업개선 프로세스
- 다중 로봇을 이용한 선박 객실 진동의 능동 제어 기법 연구
- 오스테나이트계 스테인리스 주강에서 합금원소가 크랙에 미치는 영향
- 플랫디자인 적용에 따른 웹사이트 감성 효과 연구
- G-type 개질 알지네이트 섬유제조 및 특성
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!