학술논문
재킷 두 장 소매에 관한 연구
이용수 2
- 영문명
- A Study on the Jacket Two-Piece Sleeve
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 임자영(Ja Young Lim)
- 간행물 정보
- 『산업기술연구논문지』산업기술교육훈련논문지 제20권 3호, 19~27쪽, 전체 9쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2015.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The purpose of this study was to investigate the in method of patternmaking, fit in sleeve, acsthetic view, fashionableness in the four types two-piece sleeve under the controled situation.
In order to conduct the experiment for the study, 5 persons who were well organized. another pannel were tested for fit in sleeve, aeshtetic view, fashionableness in the four types of two-piece sleeve in jacket under the controled situation. four sleeve patterns used by the scientific world and researchers and presenting the two-piece sleeve drawing method well able to express the humeral curved surface of the upper limbs of the human body.
The results of this study were as followed : The central seam line of the sleeve turned back again in all of the 4 sleeve slopers. The phenomenon of the sleeve lifting up from the lower sleeve varied according to the volume of shrinkage of the circumferential line of the armhole width of the sleeve It was found that the volume of shrinkage in Sma’s method, in Ra sara’s method, in Oh Sun-hee’s method, and in Kim Hyo-suck’s method was 2.4, 1.8 2.5 and 2.2 respectively. Therefore, it could be found that the best sihlouttre of the two-piece sleeve taken in a full-dress form was expressed when the appropriate volume of shrinkage considering the physical properties of the material formed the circumferential line of the armhole width of the sleeve.
목차
ABSTRACT
Ⅰ. 서론
Ⅱ. 이론적 배경
Ⅲ. 연구방법 및 절차
Ⅳ. 연구결과 및 분석
Ⅴ. 결론
참고문헌
해당간행물 수록 논문
- 자유곡면 모델을 이용한 황삭 가공용 NC 데이터 생성에 관한 연구
- 진동기구의 SAE 5155강재 부식에 따른 압축 잔류응력의 영향
- 선박통합정보시스템을 위한 가상화 도입 방안에 대한 연구
- 무기물 입자를 사용한 폴리프로필렌 수지의 물성 개선에 대한 연구
- GAIN 값 변화에 강인하게 개선된 PID 제어기
- 임베디드 시스템 코드 재사용성에 대한 연구
- 항공기 계기 착륙 실습 장치 설계
- 로봇 제어기를 위한 멀티키패드 회로 디자인에 대한 연구
- Solid Wire와 Flux Cored Wire의 용접에 따른 탄소강(SS400)의 기계적 특성
- 증기분사식 진공냉동기의 특성에 관한 실험적 연구
- 재킷 두 장 소매에 관한 연구
- 매뉴얼라인 분석을 통한 작업개선 프로세스
- 다중 로봇을 이용한 선박 객실 진동의 능동 제어 기법 연구
- 오스테나이트계 스테인리스 주강에서 합금원소가 크랙에 미치는 영향
- 플랫디자인 적용에 따른 웹사이트 감성 효과 연구
- G-type 개질 알지네이트 섬유제조 및 특성
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!