학술논문
Structural Characteristics on InAs Quantum Dots multi-stacked on GaAs(100) Substrates
이용수 0
- 영문명
- Structural Characteristics on InAs Quantum Dots multi-stacked on GaAs(100) Substrates
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제7권 제1호, 25~28쪽, 전체 4쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2000.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
분자선에피택시법에 의하여 GaAs(100)기판 위에 InAs 자발형성양자점을 성장하였다. InAs 양자점은 1, 3, 6, 10, 15 및 20층 등으로 다양하게 적층되어졌고, GaAs 층과 InAs 양자점 층은 각각 20 MLs와 2 MLs의 두께를 갖도록 하였다. 이 양자점의 나노구조적 특성은 PL과 STEM을 사용하여 분석하였다. 가장 높은 PL 강도는 6층의 적층구조를 갖는 시편에서 나타났고 PL 피크의 에너지가 적층회수가 증가함에 따라 분리됨을 알 수 있었다. STEM분석결과, 6층의 적층구조에서는 결함이 거의 없이 수직으로 형성된 구조를 보여준 반면에 10층 이상의 적층구조를 가질 때 그 성장 방향에 따라 volcano형상을 갖는 결함이 수직하게 성장되어졌다.
영문 초록
The InAs self-assembled quantun dots (SAQDS) were grown on a GaAs(100) substrate using a molecular beam epitaxy (MBE) technique. The InAs QDs were multi-stacked to have various layer structures of 1, 3, 6, 10, 15 and 20 layers, where the thickness of the GaAs spacer and InAs QD layer were 20 monolayers (MLs) and 2 MLs, respectively. The nanostructured feature was characterized by photoluminescence (PL) and scanning transmission electron microscopy (STEM). It was found that the highest PL intensity was obtained from the specimen with 6 stacking layers and the energy of the PL peak was split with increasing the number of stacking layers. The STEM investigation exhibited that the quantum dots in the 6 stacking layer structure were well aligned in vertical columns without any deflect generation, whereas the volcano-like deflects were formed vertically along the growth direction over 10 periods of InAs stacking layers.
목차
1. Introduction
2. Experimental Procedures
3. Results and Discussion
4. Conclusions
Acknowledgments
References
키워드
해당간행물 수록 논문
- Reliability Enhancement of Anisotropic Conductive Adhesives Flip Chip on Organic Substrates by Non-Conducting Filler Additions
- 공기막의 스퀴즈효과를 고려한 마이크로미러 설계에 관한 연구
- Critical Cleaning Requirements for Back End Wafer Bumping Processes
- 유리-유리 기판의 진공-정전 열 접합 특성
- LTCC-M 기술을 이용한 내부실장 R, L, C 수동소자의 특징 및 LMR용 PAM개발
- 고주파 MCM-C용 내부저항의 제작 및 특성 평가
- Critical Cleaning Requirements for Flip Chip Packages
- Stacked Chip Package를 위한 Sn-Sn 기계적 접합의 미세구조와 접착강도
- Structural Characteristics on InAs Quantum Dots multi-stacked on GaAs(100) Substrates
- 접촉각 측정과 AFM/LFM을 이용한 불화 유기박막의 특성 평가
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!