학술논문
장부치수에 다른 장부결합부의 강도 및 강성도 변화
이용수 0
- 영문명
- Change of Strength and Stiffness of Tenon-and-Mortise Joints Depending on Tenon Dimensions
- 발행기관
- 한국가구학회
- 저자명
- 장상식(Sang-Sik Jang)
- 간행물 정보
- 『한국가구학회지』한국가구학회지 제5권 제2호, 43~50쪽, 전체 8쪽
- 주제분류
- 예술체육 > 미술
- 파일형태
- 발행일자
- 1994.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
To Investigate the effect of tenon dimension and using adhesive and wedge on the strength and stiffness of tenon-and-mortise joints, strength tests were performed with specimens having various length, height and width of tenon. The results obtained were summarized as follows: 1. Load-carrying capacity of tenon-and-mortise joints increased as the length, height and width of tenon increased. Among these three factors, the effect of length increase was greatest. 2. Tenon-and-mortise joints showed joint modulus of the level of 10-5 rad/kgf cm for all dimensions used in this study when adhesive was used, which means very stiff joints. 3. Joint modulus of tenon-and-mortise joints decreased as length, height and width of tenon increased, and these effects were evident when the length of tenon was short. 4. Tenon-and-mortise joints, in which neither adhesive nor wedge was used, showed also relatively low joint modulus that was around the level of 10-⁴ rad/kgf. em. 5. Wedge caused increase of strength and stiffness of tenon-and-mortise joints, and the increase was more evident when adhesive was used.
목차
1. 서론
2. 강성계수
3. 재료 및 방법
4. 결과 및 고찰
5. 결론
참고문헌
키워드
해당간행물 수록 논문
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!