피로손상된 제진합금의 경도에 미치는 피로응력의 영향

• 영문명: Effect of Fatigue Stress on the Hardness of Damaged Damping Alloy Under Fatigue Stress
• 발행기관: 한국산업기술융합학회(구. 산업기술교육훈련학회)
• 저자명: 한현성(Hyun-Sung Han)
• 간행물 정보: 『산업기술연구논문지』산업기술연구논문지 제23권 4호, 123~130쪽, 전체 8쪽
• 주제분류: 공학 > 공학일반
• 파일형태: PDF
• 발행일자: 2018.12.30

영문 초록

This study was carried out to investigate the effect of fatigue stress and microstructure on the hardness in fatigue-damaged Fe-22Mn-12Cr-3Ni-2Si-4Co damping alloy. αʹ and ε-martensite were formed in the alloy owing to the fatigue stress. The martensite formed by the fatigue stress was formed with the specific direction and surface relief or crossing each other. With an increase in fatigue stress, the volume fraction of αʹ-martensite and ε-martensite increased,; the rate of increase of αʹ-martensite was faster than that of ε-martensite. With an increase in fatigue stress, the hardness was increased slowly first, and then rapidly by increasing the volume fraction of martensite. The hardness of the fatigue-damaged Fe-22Mn-12Cr-3Ni-2Si-4Co alloy was strongly affected in the αʹ-martensite; these results agreed with results obtained for an alloy showing the strain induced martensite transformation.

목차

Ⅰ. 서 론

Ⅱ. 시료 및 실험 방법

Ⅲ. 실험결과 및 고찰

Ⅳ. 결 론

키워드

Fatigue Damage(피로손상) Damping Alloy(제진합금) Fatigue Stress(피로응력) Hardness(경도) Martensite(마르텐사이트)