학술논문
PLC를 이용한 온도제어에서 선형함수와 시그모이드함수 제어기 성능 비교
이용수 85
- 영문명
- Comparison of Linear and Sigmoid Functions for Controlling Temperature Using PLC System
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 김군진(Gun-Jin Kim)
- 간행물 정보
- 『산업기술연구논문지』산업기술연구논문지 제23권 4호, 35~42쪽, 전체 8쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2018.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
Temperature control using Programmable Logic Controller(PLC) was normally implemented as Proportional Integral Derivative(PID) controller. While establishing the PID parameter, increasing the Proportional(P) gain to
improve the response characteristics resulted in a smaller linear control region. When the linear region becomes smaller, the control changes from the desired PID control to the undesired on/off switching control. As a solution to this problem, a new control method using sigmoid function has been applied. To validate the new control method, an experiment was conducted to compare the sigmoid function control by controlling the P gain
parameter. The experimental set-up comprised a heater, a cooler(fan), a temperature sensor, the PLC input and an ADC-modules. A TCP/IP communication was implemented using a communication socket for transferring data from the PLC to the PC. The data from the PLC was supplied to the PC using LabVIEW. With this experimental set-up, the resulting temperature variation was displayed graphically on the PC screen. Simultaneously, the data from each PLC was stored and analyzed in the PC. From the experimental results, the control performance as determined by the sigmoid function was found to be better than that by the linear function.
목차
Ⅰ. 서 론
Ⅱ. PLC를 이용한 온도 피드백 제어기
Ⅲ. 실험장치 및 방법
Ⅳ. 실험결과
Ⅴ. 고찰 및 결론
키워드
해당간행물 수록 논문
- 산업기술연구 논문지 목차
- 동종재 마찰용접의 적정 용접조건에 관한 연구
- 담수호 저장수 열에너지 이용에 관한 연구
- 어코스틱에미션 신호를 활용한 고장력강 용접성 평가에 관한 연구
- PLC를 이용한 온도제어에서 선형함수와 시그모이드함수 제어기 성능 비교
- 퓨란 사형 주조 후육단면 C. V. 흑연주철의 기계적 성질에 미치는 합금원소의 영향
- 대장균내 발현벡터의 안정성 향상으로 L-페닐알라닌 생산
- 탄소단섬유강화 사출성형 복합재료의 파괴강도에 관한 연구
- 전력품질 향상을 위한 단상 AC-DC 컨버터 연구 동향
- 인천시청자미디어센터의 효율적 Public Access Channel 활성화 방안에 관한 연구
- 365nm 파장의 고효율 UVLED 집광 렌즈 설계를 통한 웨이퍼 주변노광 시스템 성능평가
- 흡착식 제습시스템 유동특성에 관한 연구
- 피로손상된 제진합금의 경도에 미치는 피로응력의 영향
- API-L450 및 X65강으로 제조된 파이프의 고장력강 용접봉 종류별 용접조건과 인장시험 연구
- 태양전지 어레이의 온도에 따른 실험적 연구
- 조직내 의사결정체계에 대한 연구(신고전학파 중심으로)
- 아스타잔틴에 의한 염증성 유전자발현억제와 흑색종양의 성장억제효과에 관한 연구
- 도체증분법을 활용한 태양전지의 최대출력점에 관한 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!