학술논문
PEDOT:PSS 정공 수송층에 금 나노입자를 첨가한 유기태양전지의 제작 및 특성 연구
이용수 9
- 영문명
- Fabrication and Characterization of Organic Solar Cells with Gold Nanoparticles in PEDOT:PSS Hole Transport Layer
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제20권 제2호, 39~46쪽, 전체 8쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2013.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
본 논문은 캐리어의 이동도 및 전도도를 개선하고, 흡수된 빛의 이동 경로를 증가시켜 광흡수도를 높이기 위하여 정공 수송층 재료에 금 나노입자를 첨가하여 유기태양전지를 제작하였다. 광활성층으로는 P3HT와 PCBM의 bulkheterojunction 구조를 사용하였다. 유기태양전지에서 금 나노입자를 첨가한 정공 수송층의 효과를 관찰하기 위하여 금 나노입자의 첨가량(0, 0.5, 1.0 wt% Au)과 열처리온도(상온, 110℃, 130℃, 150℃)에 따른 광학적·전기적 특성을 조사하였다. 최대전력변환효율을 갖는 유기태양전지는 0.5 wt% 금 나노입자 첨가한 소자와 130℃에서 열처리한 소자에서 관찰되었다. 이때 유기태양전지의 전기적 특성은 금 나노입자를 0.5 wt% 첨가한 경우, 단락전류밀도, 곡선인자 및 전력변환효율은 각각 10.2 mA/cm², 55.8% 및 3.1%로 나타났으며, 130℃에서 열처리한 경우, 12.0 mA/cm²의 단락전류밀도와 64.2%의 곡선인자를 가지며, 4.0%의 전력변환효율이 관찰되었다.
영문 초록
In this paper, organic solar cells(OSCs) based on bulk-heterojunction structures were fabricated by spin coating method using polymer P3HT and fullerene PCBM as a photoactive layer. The fabricated OSCs had a simple glass/ITO/PEDOT:PSS/P3HT:PCBM/Al structures. The photoactive layer of mixed P3HT:PCBM was formed with 1:1 weight ratio. The hole transport layer(HTL) was used conducting polymer PEDOT:PSS concentration with gold nanoparticles. The annealing temperature and concentration of nanoparticles in HTL were verified to improve the OSC characterization. The percentage of gold nanoparticles in HTL were 0.5 wt% and 1.0 wt%, and the surface morphology, electrical properties and absorption intensities were investigated. The devices were 0.5 wt%, and the highest 3.1% of the powder conversion efficiency(PCE), 10.2 mA/cm² of the maximum short circuit current density(JSC), 0.535V of the open circuit voltage(VOC) and 55.8% of the fill factor(F.F) could be obtained when the nanoparticle concertration was 0.5 wt%. The annealing temperature of HTL was 110℃, 130℃, 150℃ in vacuum oven and measured the absorption intensities, surface morphology, crystallinity and electrical properties were investigated. The best property was obtained in HTL annealed at 130℃ for gold nanoparticles of 0.5 wt%, showing that JSC, VOC, F.F and PCE were about 12.0 mA/cm², 0.525V, 64.2% and 4.0%, respectively.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- 도금인자에 따른 LED 리드프레임 상의 도금층의 반사특성
- 웨이퍼 레벨 Cu 본딩을 위한 Cu/SiO₂ CMP 공정 연구
- 유연 반도체/메모리 소자 기술
- PEDOT:PSS 정공 수송층에 금 나노입자를 첨가한 유기태양전지의 제작 및 특성 연구
- Photoresist thermal reflow 방법을 이용하여 제작한 마이크로렌즈 어레이의 형상 관련 오차 및 이에 대한 보정
- 열압착 접합 조건에 따른 경·연성 인쇄회로기판 간 Sn-58Bi 무연솔더 접합부의 기계적 특성
- 3차원 적층 패키지를 위한 Cu/Ni/Au/Sn-Ag/Cu 미세 범프 구조의 열처리에 따른 금속간 화합물 성장 거동 분석
- 삼차원집적공정에서 원자현미경을 활용한 Wafer Bonding Strength 측정 방법의 신뢰성에 관한 연구
- Study on the Nonlinear Characteristic Effects of Dielectric on Warpage of Flip Chip BGA Substrate
- 수치해석에 의한 TSV 구조의 열응력 및 구리 Protrusion 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!