분말상 탄닌수지로 제조한 PB의 물리·기계적 특성

• 영문명: Physical and Mechanical Properties of Particleboard made with Powdered Tannin Adhesives
• 발행기관: 한국가구학회
• 저자명: 강석구(Seog Goo Kang) 이화형(Hwa Hyoung Lee)
• 간행물 정보: 『한국가구학회지』한국가구학회지 제14권 제2호, 2~12쪽, 전체 11쪽
• 주제분류: 예술체육 > 미술
• 파일형태: PDF
• 발행일자: 2003.12.30

영문 초록

This study was carried out to determine the mechanical and physical properties of particle boards glued with condensed tannin (Wattle Tannin) powder that was single-molecule phenolic compounds like powdered phenolic resin. Our findings are ; 1) It is necessary to spray water on the chip surfaces for effective application of powdered -form tannin resin. It shows that the best and optimum mat moisture increase is 14% of water spray on the surface of chips for developing PB properties. 2) In general, for both liquid and powdered tannin adhesives, their physical and mechanical properties has been proportional to the increase of resin level. But, the most efficient addition ratio is 16% of resin on dry basis. Specially, it is found that the resin level influences on the amount of free formaldehyde emission. The higher the resin level is, the lower the emission is. These phenomena seem to result from the increase of hexamine or formaline in the adhesives used as a hardener, that reduce the free-formaldehyde amount by reaction of tannin of poly-molecule and water. 3) The optimum condition for manufacturing PBs is the condition of hexamine of 5% and formaline of 6% in mechanical and physical properties. Hexamine is superior to formaline in mechanical and physical properties along with the control of the free formaldehyde emission amount. The result of NaOH s addition is insignificant in all experiments of both mechanical and physical properties.

목차

1. 서론

2. 재료 및 방법

3. 결과 및 고찰

4. 결론

5. 참고문헌