학술논문
목재의 마이크로파 건조과정의 동탄성적 특성
이용수 0
- 영문명
- Properties of Dynamic Elasticity of Wood during Microwave Drying
- 발행기관
- 한국가구학회
- 저자명
- 홍병화(Hee-Seop Byeon) 변희섭(Byung-Wha Hong)
- 간행물 정보
- 『한국가구학회지』한국가구학회지 제7권 제1호, 95~102쪽, 전체 8쪽
- 주제분류
- 예술체육 > 미술
- 파일형태
- 발행일자
- 1996.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
This study was performed to investigate the properties of dynamic elasticity and internal friction during microwave irradiation drying. Three species, red pine(Pinus densiflora Siebold et Zuccarini), chestnut tree (Castanea crenata Siebold et Zuccarini) and black locust(Robinia pseudoaccacia Linnaeus)were tested with three heating conditions(l, 2 and 3 minutes repeated treatment). The res 띠ts were summarized as follows: 1. The dynamic modulus of elasticity(DMOE), in all the other conditions except the heating conditions for 2 and 3 minutes of red pine, had a tendency to decrease as wood moisture content decreased till 20% moisture content and then increase. The DMOE of red pine dried to the target moisture content was similar or a little higher than that of the green red pine. However, in case of chestnut tree and black locust the DMOEs of the specimens dried to the target moisture content were lower than those of green specimens The DMOEs of chestnut tree specimens treated for 2 and 3 minutes decreased with the ratio of about 0.9 as compared with those of the green specimens. 2. The internal friction(IF) had a tendency to increase and then decrease as wood moisture content decreased during microwave heat treatment 때 d the IF of red pine was generally higher than that of black locust. 3. The drying rate during microwave heat treatment depended not on the number of heat treatment applied but on the total heat treatment time. There was no significant difference between heat treatment times required to dry each species to target moisture content, even though each species had different green moisture content.
목차
1. 緖論
2. 材料 및 方法
3. 結果 및 考察
4. 結論
참고문헌
키워드
해당간행물 수록 논문
- 실용신안공보
- 용액화목질로부터 페놀계 접착제의 제조
- 뉴 오피스 환경과 경영혁신에 관한 연구 (7)
- 定狀波裝置에 의한 라왕合板 의 吸音과 音響임피이던스
- 가구산업의 신제품개발 아이디어 평가모형에 관한 연구
- 대구, 경북지역 가구산업의 현황분석 및 발전방향
- 潭陽地域 완대, 분죽 및 맹종죽의 生長特性
- 이태리 포플라와 낙엽송 세이빙으로 제조한 보드의 휨강도와 박리강도
- 小俓材를 이용한 家具製造用 集成板 生産收率 分析에 관한 硏究
- 신문고지섬유 혼합 하드보드와 아세틸화섬유 포층구성 하드보드의 물성
- 목재의 마이크로파 건조과정의 동탄성적 특성
- 家具産業用 컴퓨터 software의 利用
- 페놀수지와 TCA 침전혈분의 혼합접착제가 합판의 성질에 미치는 효과
참고문헌
관련논문
예술체육 > 미술분야 BEST
더보기예술체육 > 미술분야 NEW
- 조형디자인연구 제27집 1권 목차
- 지속가능한 발전 패러다임에서의 실크스크린과 DTP(Digital Textile Printing)의 기술 발전 사례 분석
- 유리 스트링거를 드로잉 도구로 활용한 작품 제작 연구
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!