학술논문
작업조건의 변화에 따른 상지의 피로 특성 분석
이용수 47
- 영문명
- An Analysis of Fatigue Characteristics of Upper limbs by Task Conditions Change
- 발행기관
- 한국산업경영시스템학회
- 저자명
- 이상도(Sang Do Lee) 심정훈(Joung Hoon Sim)
- 간행물 정보
- 『산업경영시스템학회지』제28권 제3호, 75~86쪽, 전체 12쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2005.09.01
4,240원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
To investigate the fatigue characteristic of upper limbs, this study analyzed RMS(root mean square) and MPF(mean power frequency) value between initial and terminal stages of each experiment condition. And the effect of intermittent endurance time was evaluated using the Borg's CR10 value that was measured for the parts of upper limb. According to the results of ANOVA on RMS value, there were significant difference on the %MVC about push, pull, and down force exertion. Particularly the ANOVA of up force exertion was significant difference on shoulder flexion, elbow flexion and rest time as well as %MVC. The results of ANOVA for MPF value were significant difference on the %MVC in regard of the push and up force exertion. In case of up force exertion, MPF value tended to shift low frequency at all of the experiment conditions. According to the analysis of duty cycle, RMS value considerably increased over 50% duty cycle and as the %MVC increased, the duty cycle affected the increase of RMS value. MPF value for up and down force exertion decreased at 33%, 50% and 67% duty cycle for all of %MVC. Borg CR10 value of hand and forearm were below the 3-point to the 40% of endurance time at 30%MVC and to the 20% of endurance time at 50%MVC with the exception of up force exertion. But Borg CR10 values of upper arm and shoulder at up force exertion were more than 3-point to the 20% of endurance time at 30%MVC and in the start point of endurance time at 50%MVC.
목차
Abstract
1. 서론
2. 실험계획 및 절차
3. 실험결과
4. 결론
참고문헌
키워드
해당간행물 수록 논문
- 창업보육센터 활성화를 위한 입주목적과 지원요구사항간의 상관관계에 관한 연구
- 실수 코딩 유전자 알고리즘을 이용한 생산 시스템의 시뮬레이션 최적화
- KS 이행에 따른 경제적 효과에 관한 연구
- 휴대폰 배터리 개발을 위한 QFD 활용 연구
- 유전 알고리듬을 이용한 U형태 혼합모델에서의 작업시간과 육체적 작업부하를 고려한 최적 라인밸런싱
- PC 기반 양방향 무선데이터 시스템 개발에 관한 연구
- 하이브리드 자동 통역지원 시스템에 관한 연구
- 정보기술 성과 평가 모델에 관한 연구
- 유전자 알고리즘을 활용한 부품 군의 형성과 수요 변화하의 기계 셀 설계
- 베이지안 확률 모형을 이용한 위험률 함수의 추론
- 3차원 컨테이너 적재 문제를 위한 발견적 해법
- 인터넷 쇼핑몰 이용자의 의식 및 이미지 특성 분석 - 대학생을 중심으로 -
- 데이터마이닝을 이용한 공정변수 확인 및 공정개선
- 저자소개 외
- 학교정보관리시스템의 효용성 제고 - 제 문제와 개선방안 -
- PC 구성물질에 관한 LCA 사례연구
- 작업조건의 변화에 따른 상지의 피로 특성 분석
- 온라인 쇼핑몰에서 고객의 감성을 활용한 추천 효과
- Modeling, Analysis of Flexible Manufacturing System by Petri Nets
- New Warranty Model with Varying Usage Intensity
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!