학술논문
티타늄 가공에서 절삭력 분석을 위한 ADL 밀링 가공특성
이용수 11
- 영문명
- ADL Milling Characteristics for the Analysis of Cutting Force of Titanium Machining
- 발행기관
- 한국산업경영시스템학회
- 저자명
- 한정식(Jeong Sik Han) 정종윤(Jong Yun Jung)
- 간행물 정보
- 『산업경영시스템학회지』제45권 제3호, 104~114쪽, 전체 11쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2022.09.30
4,120원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The purpose of using coolant in machining is both to increase a tool life and also to prevent product deformation and thus, stabilize the surface quality by lubricating and cooling the tool and the machining surface. However, a very small amount of cutting mist should be used because chlorine-based extreme pressure additives are used to generate environmental pollutants in the production process and cause occupational diseases of workers. In this study, medical titanium alloy (Ti-6Al-7Nb) was subjected to a processing experiment by selecting factors and levels affecting cutting power in the processing of the Aerosol Dry Lubrication (ADL) method using vegetable oil. The machining shape was a slot to sufficiently reflect the effect of the cutting depth. As for the measurement of cutting force, the trend of cutting characteristics was identified through complete factor analysis. The factors affecting the cutting force of ADL slot processing were identified using the reaction surface analysis method, and the characteristics of the cutting force according to the change in factor level were analyzed. As the cutting speed increased, the cutting force decreased and then increased again. The cutting force continued to increase as the feed speed increased. The increase in the cutting depth increased the cutting force more significantly than the increase in the cutting speed and the feed speed. Through the reaction surface analysis method, the regression equation for predicting cutting force was identified, and the optimal processing conditions were proposed. The cutting force was predicted from the secondary regression equation and compared with the experimental value.
목차
1. 서 론
2. 실험 설계 및 데이터
3. 분산분석
4. 중심합성법 분석
5. 절삭력 예측
6. 결 론
해당간행물 수록 논문
- 전군 공통 서비스 구현을 위한 국방 IoT 적용방향 연구
- 공급망의 사회적 자본 특성이 친환경 공급망관리 프로젝트 성과에 미치는 영향
- 기업집단의 서비스화가 경영성과에 미치는 영향
- 국가 역량을 고려한 효율성 기반 한국형 항공모함 규모 최적화 연구
- 빅 데이터 분석능력과 기업 성과 간의 관계에서 혁신 및 개선 활동과 시장 민첩성의 영향
- 잔여 유효 수명 예측 모형과 최소 수리 블록 교체 모형에 기반한 비용 최적 예방 정비 방법
- 자동화 물류시스템 내 차량 혼잡도를 고려한 무인운반차량의 동적 경로 결정 알고리즘
- 모바일 쇼핑채널의 지속가능한 경쟁력에 영향을 미치는 소비자 가치 요인에 관한 연구
- 경미한 고장을 수반하는 시스템에 대한 노화 및 예방적 교체 정책
- 칠러장비의 온도제어를 위한 최적 PID 제어
- 생성집합을 이용한 다 기간 성과평가를 위한 DEA 모델 개발 및 공학교육혁신사업 사례적용
- 지속 가능한 도시경영을 위한 중국 후난성 주요 도시의 공간적 성장 특징분석
- 기업의 ESG 활동, 녹색 혁신과 기업성과 간 관계 연구
- 티타늄 가공에서 절삭력 분석을 위한 ADL 밀링 가공특성
- 굵은 골재를 이용한 3D 콘크리트 프린팅 기술개발에 대한 연구
- 대전지역 Cable TV의 운영현황 및 경쟁력 제고 방안
- 국내 뿌리기업의 기술혁신역량이 경영성과에 미치는 영향
- 스마트 팩토리로의 전환에 있어서 기술준비도가 통합기술수용요인에 미치는 영향
- 스마트시티 프로젝트 이해관계자 간의 목표 우선순위에 대한 연구
- 트리즈로 분석한 코로나19 대응 선별진료소의 진화
- 한국 주식시장에서의 군집화 기반 페어트레이딩 포트폴리오 투자 연구
- 산업경영시스템학회지 제45권 제3호 목차
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!