학술논문
Thermal Transient Characteristics of Die Attach in High Power LED Package
이용수 9
- 영문명
- Thermal Transient Characteristics of Die Attach in High Power LED Package
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제12권 제4호, 331~338쪽, 전체 8쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2005.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The rapid advances in high power light sources and arrays as encountered in incandescent lamps have induced dramatic increases in die heat flux and power consumption at all levels of high power LED packaging. The lifetime of such devices and device arrays is determined by their temperature and thermal transients controlled by the powering and cooling, because they are usually operated under rough environmental conditions. The reliability of packaged electronics strongly depends on the die attach quality, because any void or a small delamination may cause instant temperature increase in the die, leading sooner or later to failure in the operation. Die attach materials have a key role in the thermal management of high power LED packages by providing the low thermal resistance between the heat generating LED chips and the heat dissipating heat slug. In this paper, thermal transient characteristics of die attach in high power LED package have been studied based on the thermal transient analysis using the evaluation of the structure function of the heat flow path. With high power LED packages fabricated by die attach materials such as Ag paste, solder paste and Au/Sn eutectic bonding, we have demonstrated characteristics such as cross-section analysis, shear test and visual inspection after shear test of die attach and how to detect die attach failures and to measure thermal resistance values of die attach in high power LED package. From the structure function oi the thermal transient characteristics, we could know the result that die attach quality of Au/Sn eutectic bonding presented the thermal resistance of about 3.5K/W. It was much better than those of Ag paste and solder paste presented the thermal resistance of about 11.5~14.2K/W and 4.4~4.6K/W, respectively.
목차
1. Introduction
2. Experimental
3. Result and Discussion
4. Conclusion
References
해당간행물 수록 논문
- 교류자기장에 의한 유도가열체를 이용한 평판 디스플레이용 COG (Chip On Glass) 접속기술
- Thermal Transient Characteristics of Die Attach in High Power LED Package
- 공정조성 SnPb 솔더에 대한 실시간 Electromigration 거동 관찰
- 유기박막 트랜지스터용 PVP (poly-4-vinylphenol) 게이트 절연막의 제작과 특성
- 리플로우 조건에 따른 Sn-52In 솔더범프의 전단응력과 전단에너지 비교
- 스텐실 프린트법으로 인쇄한 Sn-1.8Bi-0.7Cu-0.6In 솔더의 고온 시효 특성
- 강유전체게이트 전계효과 트랜지스터의 정보저장특성 향상을 위한 SrBi₂Nb₂O₉ 박막의 급속 결정성장방법
- Cu 금속배선을 위한 카본-질소-텅스텐 확산방지막 특성
- BGA 패키지의 기계적·전기적 특성 평가 및 평가법
- 저밀도 파장분할 다중화용 PIN PD 제작 및 특성
- UV 차단 금속막을 이용한 잔류층이 없는 UV 나노 임프린트 패턴 형성
- SnAgCu 솔더 라인의 Electromigration특성 분석
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!