학술논문
전기도금법으로 제조한 Ni 박막의 전기비저항 및 솔더 반응성
이용수 2
- 영문명
- Electrical Resistivity and Solder-Reaction Characteristics of Ni Films Fabricated by Electroplating
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제12권 제3호, 253~258쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2005.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
도금전류밀도에 따른 Ni박막의 결정립 크기, 전기비저항, 솔더 wetting angle 및 금속간화합물의 성장속도를 분석하였다. 도금전류밀도를 5mA/cm²에서 40mA/cm²로 증가시킴에 따라 Ni 박막의 표면 nodule의 크기가 감소하고 결정립이 미세화 되었으며, 전기비저항이 7.37μΩ-cm에서 9.13μΩ-cm로 증가하였다. 5mA/cm² 및 10mA/cm²에서 도금한 Ni 박막이 40mA/cm²에서 형성한 Ni 박막에 비해 전기비저항이 낮고 dense하며 계면 금속간화합물의 성장속도가 느리기 때문에 무연솔더의 UBM 용도로 더 적합할 것이다.
영문 초록
Characteristics of electroplated Ni films such as grain size, resistivity, solder wetting angle, and growth rate of intermetallic compound were evaluated as a function of electroplating current density. With increasing the electroplating current density from 5mA/cm² to 40mA/cm² , the nodule size on the Ni film surface decreased, grain refinement occurred, and resistivity increased from 7.37μΩ-cm to 9.13μΩ-cm. Compared with Ni film processed at 40mA/cm² , Ni films electroplated at 5mA/cm² and 10mA/cm² exhibited low resistivity, dense microstructure, and slow growth rate of intermetallic compound. Ni films electroplated at 5mA/cm² and 10mA/cm² are more suitable for Ni UBM application than that fabricated at 40mA/cm² .
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- Effects of Asymmetric Distribution of Charged Defects on the Hysteresis Curves of Ferroelectric Capacitors
- Au-Sn 공정 접합을 이용한 RF MEMS 소자의 Hermetic 웨이퍼 레벨 패키징
- 페리퍼럴어레이 플립칩의 온도 분포 특성
- ITO/PEDOT:PSS/MEH-PPV/Al 구조의 고분자 유기발광다이오드의 특성 연구
- 탄소 나노튜브를 이용한 이산화질소 감지 센서의 특성
- 전기도금법으로 제조한 Ni 박막과 Ni-Al₂O₃ 복합박막의 기계적 성질
- 전기도금법으로 제조한 Ni 박막의 전기비저항 및 솔더 반응성
- Adhesion Enhancement of Thin Film Metals on Polyimide Substrates by Bias Sputtering
- Study on Charge Transport in Nanoscale Organic Monolayers for Molecular Electronics Using Liquid Phase Electrodes
- SiOG 공정을 이용한 고 신뢰성 MEMS 자이로스코프
- Improving Sensitivity of SAW-based Pressure Sensor with Metal Ground Shielding over Cavity
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!