학술논문
BGA 솔더 조인트의 전단강도에 미치는 Cu 첨가 솔더의 영향
이용수 7
- 영문명
- Effect of Cu Containing Solders on Shear Strength of As-soldered BGA Solder Joints
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제7권 제2호, 13~19쪽, 전체 7쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2000.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
금속간 화합물의 두께와 솔더와 금속간 화합물의 계면 거칠기가 Cu pad위의 BGA솔더 조인트의 전단강도에 미치는 영향을 Sn (0. 1.5, 2.5wt.% Cu)와 Sn-40Pb (0, 0.5wt.% Cu) 솔더를 사용하여 알아보았다. 각각의 조성의 솔더를 사용하여 솔더링 반응을 1, 2 ,4분 동안 한 후 전단강도를 측정하였다. Sn솔더에 Cu 첨가는 초기 금속간 화합물의 두께를 증가시키는 결과를 가져오는 반면 Sn-40Pb 솔더의 경우에는 주로 금속간 화합물/솔더의 계면거칠기의 감소를 가져오게 된다. 최대 전단 강도값을 나타내는 금속간 화합물의 임계두께는 솔더의 물질에 따라 변하게 되는데, 본 실험에서는 Sn-Cu솔더의 경우에는 ~2.3 μm, Sn-Pb-Cu에서는 ~ 1.2 μm 정도로 측정되었다. 금속간 화합물의 임계두께는 금속간 화합물/솔더의 계면이 더욱 거칠어질수록 증가하는 것으로 나타났다. 이는 파단면 관찰에서 나타난 초기의 솔더내에서의 파괴가 금속간 화합물이 임계두께 이상으로 성장함에 금속간 화합물/솔더의 계면으로 이동하는 결과와 일치한다.
영문 초록
Shear strengths of BGA solder joints on Cu pads were studied for Cu-containing Sn (0, 1.5, and 2.5 wt.% Cu) and Sn-40Pb (0 and 0.5wt.% Cu) solders, with emphasis on the roles of the Cu-Sn intermetallic layer thickness and the roughness of the interface between the intermetalic layer and solder. The shear strength test was performed for as-soldered solder joints with various soldering reaction times up to 4 min. The addition of Cu to the pure Sn solder results in an enhanced growth of the intermetallic layer whereas the effect of Cu addition to the Sn-40Pb solder is primarily on the reduction of the roughness of the intermetallic/solder interface. The critical thickness of the intermetallic layer for a maximum shear strength depends on the solder materials, which was measured to be ~ 2.3 μm for Sn-Cu solders and ~ 1.2 μm for Sn-Pb-Cu solders. The shear strength at the critical intermetallic layer thickness seems to increase as the intermetallic/solder interface becomes rougher. This is in accordance with the observation that the sheared fracture occurred initially within the solder tends to shift towards the intermetallic/solder interface as the intermetallic layer grows above the critical thickness.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
참고문헌
해당간행물 수록 논문
- BGA 솔더 조인트의 전단강도에 미치는 Cu 첨가 솔더의 영향
- Study on the Soldering of Off-eutectic Pb-Sn Solders in Partial Melting State
- UBM(Under Bump Metallurgy)이 단면 증착된 Si-wafer의 젖음성에 관한 연구
- Underfill용 액상 Epoxy Compound의 Filler 충진에 따른 Flow특성 연구
- Failure Paths Analyses of the Leadframe/EMC System
- Crystallization in Li₂O-A1₂O₃-SiO₂ Glass induced by 355 nm Nd:YAG Laser Irradiation
- TSM(Top Surface Metallurgy)이 증착된 유리기판의 Pb-free 솔더에 대한 무플럭스 젖음 특성
- X-선 노광용 마스크 제작공정에 관한 연구
- 저 유전상수 폴리머와 SiO₂기판위에 형성된 Al/Ti박막의 우선방위 비교
- 후막페이스트용 Glass Frit의 내산성에 미치는 제조방법 및 첨가제의 영향
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!