학술논문
Failure Paths Analyses of the Leadframe/EMC System
이용수 0
- 영문명
- Failure Paths Analyses of the Leadframe/EMC System
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제7권 제2호, 7~12쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2000.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
Copper-based leadframe sheets were oxidized in a black-oxide forming solution, and molded with epoxy molding compound (EMC) to form sandwiched double-cantilever beam (SDCB) specimens. The adhesion strength of leadframe/EMC interface was measured in terms of fracture toughness by using SDCB specimens and the fracture surfaces were analyzed by various equipments such as glancing-angle XRD, AFM, and SEM. Results showed that three types of failure paths, which were closely related to the surface condition of leadframes before molding.
목차
1. Introduction
2. Experimental Procedure
3. Results and Discussion
4. Conclusions
References
해당간행물 수록 논문
- BGA 솔더 조인트의 전단강도에 미치는 Cu 첨가 솔더의 영향
- Study on the Soldering of Off-eutectic Pb-Sn Solders in Partial Melting State
- UBM(Under Bump Metallurgy)이 단면 증착된 Si-wafer의 젖음성에 관한 연구
- Underfill용 액상 Epoxy Compound의 Filler 충진에 따른 Flow특성 연구
- Failure Paths Analyses of the Leadframe/EMC System
- Crystallization in Li₂O-A1₂O₃-SiO₂ Glass induced by 355 nm Nd:YAG Laser Irradiation
- TSM(Top Surface Metallurgy)이 증착된 유리기판의 Pb-free 솔더에 대한 무플럭스 젖음 특성
- X-선 노광용 마스크 제작공정에 관한 연구
- 저 유전상수 폴리머와 SiO₂기판위에 형성된 Al/Ti박막의 우선방위 비교
- 후막페이스트용 Glass Frit의 내산성에 미치는 제조방법 및 첨가제의 영향
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!