학술논문
롤투롤 인쇄공정 적용을 위한 차세대 나노입자 소결 기술
이용수 8
- 영문명
- Alternative Sintering Technology of Printed Nanoparticles for Roll-to-Roll Process
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제21권 제4호, 15~24쪽, 전체 10쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2014.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
Recently, a variety of printing technologies, including ink jet, gravure, and roll-to-roll (R2R) printing, has generated intensive interest in the application of flexible and wearable electronic devices. However, the actual use of printing technique is much limited because the sintering process of the printed nanoparticle inks remains as a huge practical drawback. In the fabrication of the conductive metal film, a post-sintering process is required to achieve high conductivity of the printed film. The conventional thermal sintering takes considerable sintering times, and requires high temperatures. For application to flexible devices, the sintering temperature should be as low as possible to minimize the damage of polymer substrate. Several alternative sintering methods were suggested, such as laser, halogen lamp, infrared, plasma, ohmic, microwave, and etc. Eventually, the new sintering technique should be applicable to large area, R2R, and polymer substrate as well as low cost. This article reviews progress in recent technologies for several sintering methods. The advantages and disadvantages of each technology will be reviewed. Several issues for the application in R2R process are discussed.
목차
1. 서론
2. 차세대 나노 입자 소결 기술
3. 결론
감사의 글
References
키워드
해당간행물 수록 논문
- 초박형 FPCB의 유연 내구성 연구
- Printing Morphology and Rheological Characteristics of Lead-Free Sn-3Ag-0.5Cu (SAC) Solder Pastes
- 서브 마이크론급 구형 동분말의 볼 밀링을 통한 플레이크 동분말의 제조
- PLD 기법으로 성장된 n형 TiO₂에서 Nb 도너의 활성화 에너지
- 롤투롤 인쇄공정 적용을 위한 차세대 나노입자 소결 기술
- Ag 코팅 Cu 플레이크 필러를 사용한 도전 페이스트의 전기 및 열전도도
- 웨어러블 패키징용 Polydimethylsiloxane (PDMS) 신축성 기판의 강성도 변화거동
- 그래핀 첨가에 따른 신축성 카본전극의 전기적 특성 변화
- Wafer 레벨에서의 위치에 따른 TSV의 Cu 충전거동
- Sn-58Bi Solder와 OSP 표면 처리된 PCB의 접합강도에 미치는 시효처리와 에폭시의 영향
- 유기 패시베이션 박막이 P3HT:PC61BM 활성층을 갖는 고분자 태양전지의 특성에 미치는 영향
- NIR Fluorescence Imaging Systems with Optical Packaging Technology
- 열린 비아 Hole의 전기도금 Filling을 이용한 Cu 관통비아 형성공정
- 잉크젯 프린팅된 Cu 박막의 응력해소를 통한 전기적 특성 개선
- 동적인 전기장이 다마신 구리 배선에서의 절연파괴에 미치는 영향
- Four Point Bending Test for Adhesion Testing of Packaging Strictures: A Review
- 전기자동차용 고신뢰성 파워모듈 패키징 기술
- An investigation on dicing 28-nm node Cu/low-k wafer with a Picosecond Pulse Laser
- 저온 수열 합성법에 의해 (1-102) 사파이어 기판상에 성장된 무분극 ZnO Layer 에 관한 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!