학술논문
Preliminary Research on the Implementation of Information of Human Facial Part Required for the 3D Printing of Eye Shield
이용수 56
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 최석윤(Seokyoon Choi)
- 간행물 정보
- 『한국방사선학회 논문지』 제13권 제7호, 954~960쪽, 전체 7쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2019.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
전산화단층검사는 많은 방사선을 받을 수 있으며, 한 명의 환자에서 반복적으로 시행되는 경우가 위험도는 매우 높다. 어린이의 경우에 방사선에 의한 암 발생률이 더 높다고 보고하고 있다. 3D 프린트는 여러분야에 적용하기 위해서 연구되고 있으며, 여러 응용 분야중 방사선 차폐체 제작 및 재료에 대한 연구가 최근 진행되고 있다. 3D 프린터의 목적은 기존의 판넬 형태의 차폐체를 대체하고 인체의 형태를 따라 맞춤형 제작을 하는 것이 최종 목적이기 때문에 3D 프린터에 입력할 3차원정보처리에 대한 연구도 매우 중요하다. 본 연구에서는 스테레오 비전의 깊이지도(depth map) 생성 기술을 이용하여 환자 맞춤형 안구차폐체 제작의 전단계인 인체표면의 3차원 데이터를 계산하고 활용 가능성을 연구하고자 하였다. 알려진 3차원 정보처리의 방법들에 비해서 비교적 간단한 방법으로 제안된 결과 안면부 3차원 정보추출을 위한 최소한의 정보가 추출되었다. 본 연구의 결과는 자연광을 적용한 스테레오영상의 장점과 한계점을 제공하였고 향후 안구 차폐체 제작을 위한 기초자료가 될 것으로 판단한다.
영문 초록
The Computed tomography (CT) scan can have high radiation in a few tests, and this risk is significant given that it is often repeated in one patient. In children, the incidence of radiation-induced cancer is reported because organs are growing, are more sensitive to radiation. 3D printing has recently been studied to be applied to various applications as a research field for 3D printing applications, research on fabrication of radiation shields and materials has been conducted. The purpose of the 3D printer is to replace the existing panel-type shields and to make customized designs according to the shape of the human body. Therefore, research on 3D information processing to be input to the 3D printer is also necessary. In this study, 3D data of the human body surface, which is the preliminary step of the manufacture of patient-specific eye shield using stereo vision depth map technology, was studied. This study aims to increase the possibility of three-dimensional output. As a result of experimenting with this method, which is relatively simple compared with other methods of 3D information processing, the minimum coordinates for 3D information are extracted. The results of this study provided the advantages and limitations of stereo images using natural light and will be the basic data for the manufacture of eye shields in the future.
목차
ABSTRACT
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Reference
해당간행물 수록 논문
- The Effect of Radiological Technologist Organizational Culture, Leadership and Organizational Commitment on Organizational Satisfaction
- Evaluation of Dose Distribution of 6 MV X-ray using Optical Dosimetry
- Investigation of Leksell GammaPlan’s ability for target localizations in Gamma Knife Subthalamotomy
- A Comparison of Density and Patient Doses According to kVp and mAs Changes in General Radiography
- Assessment of Image Quality of Dual Energy 256 MDCT Technique Focused on keV Changes for MCA Stroke in Cerebral Angiography : Single Energy CT Standard Reference Mode
- Finite Element Analysis of Wrist Orthosis with 3D Printing
- A Study on the Analysis of Risk Factors and Correlations of Coronary Artery Disease of the Examinee taking Coronary Computed Tomography Angiography in a Comprehensive Health Improvement Center
- A Study on the Artifact Reduction Method of Magnetic Resonance Imaging in Dental Implants and Prostheses
- Application of Dual Tree Complex Wavelet for Performance Improvement of CT Images
- Usefulness of Silicon Bolus Using 3D Printing of Head and Neck Patients
- Calculation of Neutron Energy Distribution from the Components of Proton Therapy Accelerator Using MCNPX
- Measurement of Radiation Dose of HR CT and Low Dose CT by using Anthropomorphic Chest Phantom and Glass Dosimetry
- Usefulness Evaluation and Fabrication of the Radiation Shield Using 3D Printing Technology
- Preliminary Research on the Implementation of Information of Human Facial Part Required for the 3D Printing of Eye Shield
- A Study of the Quantitative, Qualitative Analysis on Optimizing Diagnostic Imaging Device Selection in Nasopharynx MRI
- A Study Radiograph Techniques for Diagnosis of Axillary Fracture Ribs in X-ray
- Usefulness of Dual Energy CT to Improve Image Quality Degradation due to Lens Shielding
참고문헌
관련논문
공학 > 기타공학분야 BEST
더보기공학 > 기타공학분야 NEW
- 고분해능 및 고민감도를 위한 준 블록 섬광체를 사용한 네 층의 반응 깊이 측정 검출기 설계
- 기분장애 환자의 대뇌 피질 두께 측정에 관한 연구
- 양방향 흐름 팬텀 모델에서 탄산수의 도플러 유체 효과 연구
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!