학술논문
Usefulness of Silicon Bolus Using 3D Printing of Head and Neck Patients
이용수 95
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 권경태(Kyung-Tae Kwon) 이용기(Yong-Ki Lee) 원영진(Young-Jin Won)
- 간행물 정보
- 『한국방사선학회 논문지』 제13권 제7호, 908~916쪽, 전체 9쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2019.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
구강 및 두경부 암의 방사선치료 시 치료 범위에 피부를 포함하는 경우가 많으며 이때 볼루스의 사용이 빈번해진다. 특히 턱 부분의 요철로 인하여 환자의 적용 시 선량 불확실성을 제공한다. 본 연구에서는 3D Printing을 이용하여 Gel 볼루스와 Poly lactic acid(PLA), Silicon을 적용한 환자 맞춤형 볼루스를 제작하여 물성 특성을 확인하고, 제작된 볼루스와 치료계획의 불일치성을 확인하며, 실제 방사선 선량 전달시 발생하는 선량불확실성을 측정하였다. 그 결과 일반적인 요철 부위에는 PLA 재질의 볼루스가 안정적이며, 요철이 심하거나 환자의 체형이 자주 바뀔 수 있는 환자의 경우 Silicon 재질의 볼루스가 유용할 것으로 사료된다.
영문 초록
Radiation therapy of oral and head and neck cancers often involves skin in the therapeutic range, and the use of bolus is frequently used. Dose irregularities provide dose uncertainty in patient application. In this study, the physical properties of patients with gel bolus, poly lactic acid (PLA), and silicon using 3D printing were fabricated. Dose uncertainties arising from the actual radiation dose delivery were measured. As a result, PLA bolus was stable in the Common irregularities. Silicon bolus may be useful for patients with severe irregularities or frequent changes in patient s body shape.
목차
ABSTRACT
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Acknowledgement
Reference
해당간행물 수록 논문
- The Effect of Radiological Technologist Organizational Culture, Leadership and Organizational Commitment on Organizational Satisfaction
- Evaluation of Dose Distribution of 6 MV X-ray using Optical Dosimetry
- Investigation of Leksell GammaPlan’s ability for target localizations in Gamma Knife Subthalamotomy
- A Comparison of Density and Patient Doses According to kVp and mAs Changes in General Radiography
- Assessment of Image Quality of Dual Energy 256 MDCT Technique Focused on keV Changes for MCA Stroke in Cerebral Angiography : Single Energy CT Standard Reference Mode
- Finite Element Analysis of Wrist Orthosis with 3D Printing
- A Study on the Analysis of Risk Factors and Correlations of Coronary Artery Disease of the Examinee taking Coronary Computed Tomography Angiography in a Comprehensive Health Improvement Center
- A Study on the Artifact Reduction Method of Magnetic Resonance Imaging in Dental Implants and Prostheses
- Application of Dual Tree Complex Wavelet for Performance Improvement of CT Images
- Usefulness of Silicon Bolus Using 3D Printing of Head and Neck Patients
- Calculation of Neutron Energy Distribution from the Components of Proton Therapy Accelerator Using MCNPX
- Measurement of Radiation Dose of HR CT and Low Dose CT by using Anthropomorphic Chest Phantom and Glass Dosimetry
- Usefulness Evaluation and Fabrication of the Radiation Shield Using 3D Printing Technology
- Preliminary Research on the Implementation of Information of Human Facial Part Required for the 3D Printing of Eye Shield
- A Study of the Quantitative, Qualitative Analysis on Optimizing Diagnostic Imaging Device Selection in Nasopharynx MRI
- A Study Radiograph Techniques for Diagnosis of Axillary Fracture Ribs in X-ray
- Usefulness of Dual Energy CT to Improve Image Quality Degradation due to Lens Shielding
참고문헌
관련논문
공학 > 기타공학분야 BEST
더보기공학 > 기타공학분야 NEW
- 고분해능 및 고민감도를 위한 준 블록 섬광체를 사용한 네 층의 반응 깊이 측정 검출기 설계
- 기분장애 환자의 대뇌 피질 두께 측정에 관한 연구
- 양방향 흐름 팬텀 모델에서 탄산수의 도플러 유체 효과 연구
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!