학술논문
Evaluation of Dose Distribution of 6 MV X-ray using Optical Dosimetry
이용수 23
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 김성환(Sunghwan Kim)
- 간행물 정보
- 『한국방사선학회 논문지』 제13권 제7호, 924~932쪽, 전체 9쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2019.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
플라스틱 섬광체와 상용 50 mm, f1.8 렌즈 및 고감도 CMOS 카메라를 사용하여 방사선치료 시 흡수선량을 측정할 수 있는 광 도시메트리 시스템을 구축하였다. 아울러 촬영된 방사선 분포 영상에 대한 비네팅보정, 기하학적 왜곡 보정, 스케일 보정을 통하여 화소값으로 선량을 교정하는 절차를 확립하였다. 개발된 광 도시메트리 시스템을 6 MV 의료용 선형가속기에 대하여 선량 특성 평가를 수행한 결과, 심부선량백분율은 이온챔버로 측정한 결과에 비하여 빌드 업 깊이 이상에서는 오차 범위 2% 이내로 일치하였으며, 90% 조사야에 대하여 2.8%의 평탄도가 측정됨에 따라 방사선치료선량 측정 시스템으로서의 충분한 활용가능성을 확인하였다.
영문 초록
In this paper, we developed optical dosimetry system with a plastic scintillator, a commercial 50 mm, f1.8 lens, and a commercial high-sensitivity CMOS (complementary metal-oxide semiconductor) camera. And, the correction processors of vignetting, geometrical distortion and scaling were established. Using the developed system, we can measured a percent depth dose, a beam profile and a dose linearity for 6 MV medical LINAC (Linear Accelerator). As results, the optically measured percent depth dose was well matched with the measured percent depth dose by ion-chamber within 2% tolerance. And the determined flatness was 2.8%. We concluded that the optical dosimetry system was sufficient for application of absorbed dose monitoring during radiation therapy.
목차
ABSTRACT
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Reference
키워드
해당간행물 수록 논문
- The Effect of Radiological Technologist Organizational Culture, Leadership and Organizational Commitment on Organizational Satisfaction
- Evaluation of Dose Distribution of 6 MV X-ray using Optical Dosimetry
- Investigation of Leksell GammaPlan’s ability for target localizations in Gamma Knife Subthalamotomy
- A Comparison of Density and Patient Doses According to kVp and mAs Changes in General Radiography
- Assessment of Image Quality of Dual Energy 256 MDCT Technique Focused on keV Changes for MCA Stroke in Cerebral Angiography : Single Energy CT Standard Reference Mode
- Finite Element Analysis of Wrist Orthosis with 3D Printing
- A Study on the Analysis of Risk Factors and Correlations of Coronary Artery Disease of the Examinee taking Coronary Computed Tomography Angiography in a Comprehensive Health Improvement Center
- A Study on the Artifact Reduction Method of Magnetic Resonance Imaging in Dental Implants and Prostheses
- Application of Dual Tree Complex Wavelet for Performance Improvement of CT Images
- Usefulness of Silicon Bolus Using 3D Printing of Head and Neck Patients
- Calculation of Neutron Energy Distribution from the Components of Proton Therapy Accelerator Using MCNPX
- Measurement of Radiation Dose of HR CT and Low Dose CT by using Anthropomorphic Chest Phantom and Glass Dosimetry
- Usefulness Evaluation and Fabrication of the Radiation Shield Using 3D Printing Technology
- Preliminary Research on the Implementation of Information of Human Facial Part Required for the 3D Printing of Eye Shield
- A Study of the Quantitative, Qualitative Analysis on Optimizing Diagnostic Imaging Device Selection in Nasopharynx MRI
- A Study Radiograph Techniques for Diagnosis of Axillary Fracture Ribs in X-ray
- Usefulness of Dual Energy CT to Improve Image Quality Degradation due to Lens Shielding
참고문헌
관련논문
공학 > 기타공학분야 BEST
더보기공학 > 기타공학분야 NEW
- 고분해능 및 고민감도를 위한 준 블록 섬광체를 사용한 네 층의 반응 깊이 측정 검출기 설계
- 기분장애 환자의 대뇌 피질 두께 측정에 관한 연구
- 양방향 흐름 팬텀 모델에서 탄산수의 도플러 유체 효과 연구
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!