학술논문
고체절연물의 연면절연파괴특성 평가
이용수 18
- 영문명
- Assess a Breakdown Characteristics of Solid Dielectrics Surface Discharge Characteristics
- 발행기관
- 한국산업기술융합학회(구. 산업기술교육훈련학회)
- 저자명
- 황석렬(Sug Ryel Hwang)
- 간행물 정보
- 『산업기술연구논문지』산업기술교육훈련논문지 제20권 4호, 1~5쪽, 전체 5쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2015.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
This paper gives a basic data of the stnface discharge characreristics for solid Dielectrics in Dry-Air & SF₆ Used electrodes are needle to plane, sphere to plane and KS M3015 electrodes. Also, this paper describes the fundamental surface discharge characreristics of solid dielectric under Sphere-Plane field in insulation dielectric gases. SF₆ as conventional gas in Gas Insulared Switchgear(GIS) and environmentally friendly gases; Dry-Air are used in the same experimental conditions. Breakdown voltage and dielectric strength are found out and sorted. These results are getting higher as increasing the gas pressure acccrding to the medium effect The medium effect by the gas pressure and the gap can be explained by surface roughness of a solid dielectric and an electrode as well as an electric field which decreases due to the correlation between the collision ionization coefficient and the gap, respectively. By researching the increasing rates of breakdown voltage as following the solid dielectric thickness, it reveals that the thickness also affects the breakdown voltage. Finally, through comparing and corresponding between SF₆ and Dry-Air the possibility of replacement of SF₆ by environmentally friendly gas is proved.
목차
ABSTRACT
Ⅰ. 서론
Ⅱ. 실험장치 및 방법
Ⅲ. 심험 결과 및 고찰
Ⅳ. 결론
참고문헌
해당간행물 수록 논문
- 플라즈마 아크용접에서의 적정 플라즈마 키홀 용접 조건에 관한 실험적 연구
- 사출기 부착 형 점도금형의 제작 및 측정
- 전기자전거용 배터리 충방전 제어기 설계
- 자동차 보수도장에서 유용성 Primer의 샌딩 조건에 따른 접착강도
- SEED 블록암호알고리즘을 적용한 통합 사례관리 시스템(ECM) 개발에 관한 연구
- 고체절연물의 연면절연파괴특성 평가
- 열전소자의 냉온기능을 이용한 제어패널용 제습기 설계 및 구현
- 직류전위차 법(DCPD)에 의한 파괴인성평가
- 절점주파수 부근에서의 DC모터 주파수 특성
- 용량성 부하를 고려한 낮은 높이의 항공기용 안테나에 관한 연구
- 대학 수준별 영어수업에 대한 학습자의 만족도 및 인식에 관한 연구
- 영어수업에서의 영어은유 활용 가능성 연구
- RFID를 위한 다중편파 안테나 시스템 설계 및 구현
- 역설계에 의한 야지 특수차량용 인터액슬 드라이버 개발과정에 관한 연구
- SEM을 이용한 옹기의 기공특성 비교
- 풍력 터빈용 에어포일의 유동 해석 및 특성에 관한연구
- 다구치 방법을 이용한 냉각 필터 사출성형 공정의 최적화
- 사출성형품의 성형수축 거동에 관한 연구
- 밀링가공용 인서트의 마모에 관한 연구
- 재활용 폴리카보네이트 탄소단섬유 복합소재의 기계적 파괴특성에 관한 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!