학술논문
Two-Facing-Targets 스퍼터장치로 제작한 Ti-Al 합금박막의 성질에 미치는 증착 온도 및 박막 두께의 영향
이용수 22
- 영문명
- afreet of Deposition Temperature and Film Tnickness on the Properties of Ti-Al Thin Films Deposited by Two-Facing-Targets Sputtering System
- 발행기관
- 호서대학교 공업기술연구소
- 저자명
- 한창석(Chang-Suk Han)
- 간행물 정보
- 『공업기술연구 논문집』제31권 제1호, 1~13쪽, 전체 13쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2012.06.30
4,360원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
본 연구에서는, TFT형 DC 마그네트론 스퍼터링 장치를 사용하여 실온 및 573~773 K의 온도로 기판을 가열하여 Ti-Al 금속간화합물 박막을 제작하였다. 2원계 Ti-A1 합금화타겟의 조성은 Ti-rich (75Ti-25Al(atm%)), 화학양론 조성 (50Ti-50A](atm%)) 및 Al-rich(25Ti-75Al(atm%))이다. 제작한 Ti-A]박막의 결정화 및 상변태에 대하여 XRD.
FE-SEM 및 TEM을 이용하여 조사하였다. 열처리에 의한 상변태는 Ti-rich의 경우. ff-Ti+Ti3Al->ff-Ti+Ti3Al.
화학양론조성의 경우, amorphous/Ti + (A D ^T iA l+Ti2Al5 + Ti3A l, Aト r ic h 의 경우. A1+(TU/TiAla/TiWrᅳ아 TiAl3/T i2Al/TiAl3이다. 전자선 회절분석 결과와 X선 회절결과는 잘 일치하였으며, 결정화된 상과 미세경도에 대해서 고찰하였다.
영문 초록
In the present study, li- A l mtermetallic compound thin film s were deposited both at room temperature and at elevated substrate temperatures of 573 to 773 K by using a two-facing-targets-type D C sputtering system. Atomic compositions o f the binary Ti-Al alloy targets are Ti-rich(75Ti-25Al(atm%)), stoichiometry(50Ti-50A1(atm%)) and Al-rich(25Ti-75Al(atm%)).
The crystallization processes and phase transformaticMis o f Ti-Al thin film s were investigated by X-ray diffraction, field-emission scanning electron microscopy and transmissicm electron microscopy. Phase transformations during annealing treatment are a -Ti+Ti3A l—^ a -Ti +TisAl for Ti-rich film s, amorphous/Ti+(A1)나 T iA I+ T i2A ls+ T i3A l for stoichiometry and A l + (Ti)/TiAl2^Ti2A l5-^ a T iA l3/Ti2AI/TiAl3 for Al-rich films. The analyses o f the selected area electron diffraction patterns were in accord with X-ray diffraction results. The above results are discussed in terms o f crystallized phases and microhardness.
목차
I. 서 론
II. 실험방법
III. 실험결과 및 고찰
IV. 결 론
키워드
해당간행물 수록 논문
- 고출력 LED 모듈에서 접합형태와 칩 배열에 따른 방열특성 시물레이션
- 애완동물 질병 신속 진단키트의 개발
- Two-Facing-Targets 스퍼터장치로 제작한 Ti-Al 합금박막의 성질에 미치는 증착 온도 및 박막 두께의 영향
- 버스엔진에서 디젤연료사용에 따른 디젤 배기 미립자 물질의 특성
- 도시형 한옥 밀집지역의 가로변 건축물 파사드의 특징 분석 - 전주한옥미을의 가로변 건축물 파사드를 대상으로 -
- BIM기반 모듈러 건축물 설계 시스템 개발에 관한 연구
- In -P lane Buckling Analysis of Curved Beams with Varying Cross-Section
- LabVIEW를 활용한 지능형 강아지 로봇 구현
- Phase Changes in Transition Metal-Carbon Alloy Films (M-C; M=Fe, M, Co) Prepared by Co-Sputtering Deposition Technique
- OpenSSL의 DLL 파일내의 AES 암호 알고리듬에 대한 오류 주입 공격
- Gray Scale of a Dynamic Driving for LCD by Composite Scheme-II
참고문헌
관련논문
공학 > 공학일반분야 BEST
- Soft Power Suit for Knee Motion Assistance
- Design of Lower Limbs for a Humanoid Biped Robot
- GIVING-A-HAND - Human-centered design of a small, counter-top, robotic kitchen assistant for elderly and disabled persons
공학 > 공학일반분야 NEW
- 수중 환경에 따른 광대역 OFDM의 통신 성능 분석
- 가상국토구현을 위한 국내 디지털트윈 정책 방향과 관련 최신 연구 동향과의 비교연구
- 공기 중 부유 폐 토너 입자의 거동 특성 평가
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!