SBAS SIGNAL SYNCHRONIZATION

• 발행기관: 한국항해항만학회
• 저자명: Gangho Kim Doyoon Kim Taikjin Lee Changdon Kee
• 간행물 정보: 『한국항해항만학회 학술대회논문집』2006년도 International Symposium on GPS/GNSS Vol.1, 1~6쪽, 전체 6쪽
• 주제분류: 공학 > 해양공학
• 파일형태: PDF
• 발행일자: 2006.10.24

영문 초록

In general DGPS system, the correction message is transferred to users by wireless modem. To cover wide area, many DGPS station should be needed. And DGPS users must have a wireless modem that is not necessary in standalone GPS. But SBAS users don’t need a wireless modem to receive DGPS corrections because SBAS correction message is transmitted from the GEO satellite by L1 frequency band. SBAS signal is generated in the GUS(Geo Uplink Subsystem) and uplink to the GEO satellite. This uplink transmission process causes two problems that are not existed in GPS. The one is a time delay in the uplink signal. The other is an ionospheric problem on uplink signal, code delay and carrier phase advance. These two problems cause ranging error to user. Another critical ranging error factor is clock synchronization. SBAS reference clock must be synchronized with GPS clock for an accurate ranging service. The time delay can be removed by close loop control. We propose uplink ionospheric error correcting algorithm for C/A code and carrier. As a result, the ranging accuracy increased high. To synchronize SBAS reference clock with GPS clock, I reviewed synchronization algorithm. And I modified it because the algorithm didn’t consider doppler that caused by satellites’ dynamics. SBAS reference clock synchronized with GPS clock in high accuracy by modified algorithm. We think that this paper will contribute to basic research for constructing satellite based DGPS system.

목차

1. Introduction

2. SBAS Summary

3. Range error components

4. Signal Control

5. Clock Synchronization

6. Conclusion

키워드

DGPS SBAS Clock synchronization