학술논문
고전류밀도에서 첨가제에 따른 구리도급의 표면 특성 연구
이용수 0
- 영문명
- The Effect of Additives on the High Current Density Copper Electroplating
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제18권 제1호, 29~33쪽, 전체 5쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2011.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
전류밀도는 전기도급법에서 생산성과 직접적인 연관이 있고, 생산성의 증가를 위해선 고전류밀도가 필요하다. 회전전극(RDE)의 회전 속도를 증가시키면 고유속을 얻을 수 있다. 유속 조절을 위해 회전전극과 원통형 회전 전극을 사용하였고, 전압과 전류의 관계를 알아보기 위해 정전류, 정전압 실험과 linear sweep voltammetry 실시하였다. 회전 전극의 회전 속도가 400 rpm이상 조건에서, 수소가 발생하지 않고 1000 A/m²이상의 최대전류멸도가 가능하였다. 25℃와 62℃ 조건에서 구리의 확산계수는 각각 5.5×10⁻⁶cm²와 10.5×10⁻⁶cm² s⁻¹로 계산되었다. 수소가 발생하지 않으면서 안정적으로 구리를 전착할 수 있는 조건은 -0.05 V (vs Ag/AgCl)이었다. 첨가제인 glue와 thiourea-를 넣음으로써 구리의 침상성장을 막을 수 있었다. 표면 거칠기는 UV-Vis Spectrophotometer를 아용하여 분석되었다. 600 nm 영역에서 반사도는 측정 되었고 표면 거철기가 개선될수록 표면 반사도가 증가하였다.
영문 초록
The current density in copper electroplating is directly related with the productivity and then to increase the productivity, the increase in current density is required. To obtain the high mass flow rate, rotating disk electrode(RDE) was employed. High rotational speed in RDE can increase the mass flow rate and then high speed electroplating was possible using RDE to control mass flow. Two types of cathode were used. One is RDE and another is rotating cylindrical electrode(RCE). A constant-current, constant-voltage and linear sweep voltammetry were applied to investigate current and voltage relationship. The maximum current density without evolution of hydrogen gas was increased with rotational speed. Over 400 rpm, maximum current density was higher than 1000 A/m². The diffusion coefficients of copper calculated from the slope of the plots are 5.5×10⁻⁶cm² s⁻¹ at 25℃ and 10.5×10⁻⁶cm² s⁻¹ at 60℃. The stable voltage without evolution of hydrogen gas was -0.05 V(vs Ag/AgCl). Additives were added to prevent dendritic growth on cathode deposits. The surface roughness was analyzed with UV-Vis Spectrophotometer. The reflectance of the copper surface over 600 nm was measured and was related with the surface roughness. As the surface roughness improved, the reflectance was also increased.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- 고전류밀도에서 첨가제에 따른 구리도급의 표면 특성 연구
- 4점굽힘시험에 의한 실리콘 다이의 두께에 따른 파단강도 평가
- 열처리에 따른 Diamond-like Carbon (DLC) 박막의 특성변화
- Ultra-Wide-Band (UWB) Band-Pass-Filter for Wireless Applications from Silicon Integrated Passive Device (IPD) Technology
- 고속전단시험의 표준화를 위한 Sn3.0Ag0.5Cu 솔더볼의 전단특성
- 초박형 태양전지 제작에 Porous Silicon Layer Transfer기술 적용을 위한 전기화학적 실리콘 에칭 조건 최적화에 관한 연구
- 유연성 기판에 사용되는 전해 동박의 절곡 및 굴곡 피로 파괴와 인장 특성과의 관계
- 광 PCB 및 패키징 기술
- 생산기반기술 디지털화를 위한 지식공유형 플랫폼 개발
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!