학술논문
리튬이온전직용 카본계부극재료의 충방전 특성
이용수 0
- 영문명
- Charge-Discharge Characteristics of Carbonaceous Materials for a Negative Electrode in Lithium-Ion Batteries
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제6권 제2호, 69~74쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 1999.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
흑연 및 카본계 재료는 층상구조 내부로 리튬이온을 가역적으로 intercalation /deintercalation시킬 수 있는 특성을 지니고 있다. 리튬이온이 intercalation된 카본의 전기화학적 퍼텐셜은 리튬금속에 가까운 값이므로, 리튬이온전지의 부극용 재료로 많은 연구가 진행되고 있다. 본 연구에서는 petroleum pitch를 열분해시킨 후, 700~1300℃의 서로 다른 온도에서 각각 3시간 동안 열처리한 카본을 사용하였다. XRD 측정 결과, 카본의 결정성은 열처리 온도와 함께 증가하였다. 충방전 특성 시험 및 전해질과 카본전극 표면 사이의 계면 반응특성은 각각 0.1C의 속도로 정전류법에 의한 충방전 시험과 순환전압전류법(CV)에 의해 평가하였으며, 열처리 온도와 충방전 횟수에 따른 용량과의 관계에 대하여 논의하였다. 가역용량(reversible capacity)은 열처리 온도가 증가함에 따라 1000℃까지는 증가하지만, 그 이상의 온도에서는 약간 감소하는 경향을 보였다. 또한, 충방전 횟수가 증가할수록 충전용량은 감소하지만, 가역특성(reversibility)은 향상되었다.
영문 초록
Graphite and carbonaceous materials intercalate and deintercalate Li-ion reversibly into their layered structures. These materials show an excellent capacity for using a negative electrode in Li-ion batteries, because the electrochemical potential of Li-ion intercalated carbon is almost identical with that of lithium metal. Carbon used in this study was obtained by the pyrolysis of petroleum pitch, and heat-treated at the several temperatures between 700℃ and 1300℃. XRD analysis revealed that crystallization of carbon increased with increasing the heat treatment temperature. Charge/discharge properties were studied by a constant-current step at the rate of 0.1C, and the interfacial reaction between the electrolyte and the surface of carbon electrode was studied by cyclic voltammetry. Cell capacities were investigated in terms of the heat treatment temperature and the cycle number. Reversible capacity increased with the heat treatment temperature up to 1000℃, thereafter decreased continuously. Also, charge capacity decreased with the cycle number, while the reversibility improved with it.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- 소성 조건에 따른 WO₃계 후막센서소자의 제조 및 응답특성
- R-F magnetron sputtering 법으로 제조된 SrBi₂Ta₂O₉ 강유전성 박막의 미세구조 특성 및 전기적 특성
- CaTiO₃-La(Mg_{2/3}Ta_{1/3})O₃ 계의 고주파 유전특성
- Diamine의 구조적 이성질체에 따른 내열성 폴리이미드 박막의 잔류응력거동
- Adhesion Strength Measurements of Cu-based Leadframe/EMC Interface
- 효율적 수치해석기법을 이용한 반도체 페키지의 열방출 해석
- 고속/고집적 ATM Switching MCM 구현을 위한 설계 Library 구축 밀 시험성 확보
- FLIP CHIP ON ORGANIC BOARD TECHNOLOGY USING MODIFIED ANISOTROPIC CONDUCTIVE FILMS AND ELECTROLESS NICKEL/GOLD BUMP
- 리튬이온전직용 카본계부극재료의 충방전 특성
- Pd 촉매의 부분 산화 조절을 이용한 SNO₂박막 센서의 CH₄감도 변화 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!