학술논문
Diamine의 구조적 이성질체에 따른 내열성 폴리이미드 박막의 잔류응력거동
이용수 0
- 영문명
- Residual Stress Behavior of High Temperature Polyimide Thin Films depending on the Structural Isomers of Diamine
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제6권 제2호, 23~30쪽, 전체 8쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 1999.06.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
이성질체에 따른 폴리이미드 박막의 잔류응력 영향과 모폴로지와의 상관관계가 조사되었다. 이를 위해, Poly(phenylene biphenyltetracarboximide) (BPDA-PDA)와 poly (oxydiphenylene biphenyltetracar-boximide) (BPDA-ODA)를 여러 다른 diamine인 1, 3-phenylene diamine (1, 3-PDA), 1.4-phenylene diamine (1,4-PDA)과 3.4'-oxydiphenylene diamine (3,4'-ODA) , 4,4'-oxydiphenylene diamine (4.4'-ODA)으로부터 제조하였다. 이들 박막에 대하여, Thin Film Stress Analyzer (TFSA)를 이용하여 공정온도 (25~400℃)하에서 전구체의 열적 이미드화에 따라 실시간으로 폴리이미드 박막의 잔류응력 거동을 측정하였다. 폴리이미드 박막의 잔류응력은 면 방향 배향성과 사슬 질서도가 우수한 BPDA-1,4-PDA가 7MPa로 가장 낮게 나타났으며 BPDA-1,3-PDA, BPDA-3,4'-ODA, BPDA-4,4'-ODA의 경우 40~50Mpa 범위에 있었다. 이성질체에 따른 폴리이미드 박막의 잔류응력은 모폴로지 (사슬 강직도, 질서도, 배향성) 변화 및 유리전이 거동과 관련된 사슬 운동성을 이용하여 분석되었다.
영문 초록
The relationships between morphological structures and residual stress behaviors of polyimide thin films depending on isomeric diamines were investigated. For this study, Poly(phenylene biphenyltetracarboximide) (BPDA-PDA) and poly(oxydiphenylene biphenyltetracarboximide) (BPDA-ODA) films were prepared from their isomeric diamines: 1,3-phenylene diamine (1,3-PDA) 1,4-phenylene diamine (1.4-PDA), 3,4'-oxydiphenylene diamine (3,4'-ODA), and 4,4'-oxydiphenylene diamine (4,4'-ODA), respectively. For those films, residual stresses were detected in-situ during thermal imidization of the isomeric polyimide as a function of processing temperature over the range of 25~400℃ using. Thin Film Stress Analyzer (TFSA). In comparison, residual stress of BPDA-1.4PDA having better in-plain orientation and chain order was the lowest value of 7MPa whereas those of BPDA-1,3-PDA, BPDA-3,4'-ODA, and BPDA-4,4'-ODA were in the range of 40-50MPa. Conclusively, the effect of morphological nature (chain rigidity, chain order, orientation) and chain mobility relating to the g1ass transition behavior on the residual stress of isomeric polyimide thin films wart analyzed.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
해당간행물 수록 논문
- 소성 조건에 따른 WO₃계 후막센서소자의 제조 및 응답특성
- R-F magnetron sputtering 법으로 제조된 SrBi₂Ta₂O₉ 강유전성 박막의 미세구조 특성 및 전기적 특성
- CaTiO₃-La(Mg_{2/3}Ta_{1/3})O₃ 계의 고주파 유전특성
- Diamine의 구조적 이성질체에 따른 내열성 폴리이미드 박막의 잔류응력거동
- Adhesion Strength Measurements of Cu-based Leadframe/EMC Interface
- 효율적 수치해석기법을 이용한 반도체 페키지의 열방출 해석
- 고속/고집적 ATM Switching MCM 구현을 위한 설계 Library 구축 밀 시험성 확보
- FLIP CHIP ON ORGANIC BOARD TECHNOLOGY USING MODIFIED ANISOTROPIC CONDUCTIVE FILMS AND ELECTROLESS NICKEL/GOLD BUMP
- 리튬이온전직용 카본계부극재료의 충방전 특성
- Pd 촉매의 부분 산화 조절을 이용한 SNO₂박막 센서의 CH₄감도 변화 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!