학술논문
ENEPIG 표면처리에서의 Sn-Ag-Cu 솔더조인트 신뢰성: 1. 무전해 Ni-P도금의 두께와 표면거칠기의 영향
이용수 2
- 영문명
- Reliability of Sn-Ag-Cu Solder Joint on ENEPIG Surface Finish: 1. Effects of thickness and roughness of electroless Ni-P deposit
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제21권 제3호, 43~50쪽, 전체 8쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2014.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
전자 제품의 경박 단소화 및 고집적화가 이루어 지면서 실리콘 집과 인쇄회로기판의 인터커넥션의 고신뢰도가 요구되고 있다. 본 연구는 Sn-4.0wt%Ag-0.5wt%Cu (SAC405) 솔더와 다양한 무전해 Ni-P 도금 두께에서의 high speed shear 에너지 및 파괴 모드를 연구하였다. 파괴 모드 분석을 위하여 집속이온빔(FIB) 분석이 이용되었다. 질산 기상 처리하지 않은 1μm Ni-P 시편에서 낮은 shear 에너지가 나왔으며, 이는 솔더레지스트 선단에서 파단의 원인을 제공하는 것이 확인되었다. 질산 기상 처리한 시편에서 무전해 Ni-P 도금 두께가 커질수록 취성 파괴 모드는 감소한다. 또 Ni-P 도금 두께와 표면 거칠기(Ra)는 반비례 관계를 가진다. 이는 Ni-P 도금의 표면 거칠기를 낮추면 SAC405 솔더 조인트의 신뢰도를 향상시킨다는 사실을 나타낸다.
영문 초록
By the trends of electronic package to be smaller, thinner and more integrative, the reliability of interconnection between Si chip and printed circuit board is required. This paper reports on a study of high speed shear energy of Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder joints with different the thicknesses of electroless Ni-P deposit. A high speed shear testing of solder joints was conducted to find a relationship between the thickness of Ni-P deposit and the brittle fracture in electroless Ni-P deposit/SAC405 solder. A focused ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the fractured pad surface with and without HNO₃ vapor treatment. The high speed shear energy of SAC405 solder joint with 1μm Ni-P deposit was found to be lower without HNO₃ vapor, compared to those of over 3μm Ni-P deposit. This could be due to the edge of solder resist in 1μm Ni-P deposit, which provides a fracture location for the weakened shear energy of solder joints and brittle fracture in high speed shear test. With HNO₃ vapor, the brittle fracture mode in high speed shear test decreased with increasing the thickness of Ni-P deposit. Then the roughness (Ra) of Ni-P deposits decreased with increasing its thickness. Thus, this gives the evidence that the decrease in roughness of Ni-P deposit for Eelectroless Ni/ Electroless Pd/ Immersion Au (ENEPIG) surface play a critical role for improving the robustness of SAC405 solder joint.
목차
1. 서론
2. 실험 방법
3. 실험 결과 및 고찰
4. 결론
References
해당간행물 수록 논문
- TiO₂ 나노입자가 혼합된 봉지재를 적용한 LED 패키지의 광효율 특성 평가
- ENEPIG 표면처리에서의 Sn-Ag-Cu 솔더조인트 신뢰성
- 헵틸알콜 기반의 Cu계 나노입자 합성에서 온도 및 올레일아민 첨가량의 효과
- Fine-pitch 소자 적용을 위한 bumpless 배선 시스템
- Nanowell Array based Sensor and Its Packaging
- Pt 금속마스크를 이용하여 제작한 나노패턴 Si(111) 기판위에 성장한 GaN 박막 특성
- 태양광 조명 시스템의 집광 효율 향상을 위한 정렬 및 패키징 기술
- 플라즈마 유기막과 OSP PCB 표면처리의 Sn-Ag-Cu 솔더 접합 특성 비교
- 3차원 적층 집적회로에서 구리 TSV가 열전달에 미치는 영향
- IGBT 전력반도체 모듈 패키지의 방열 기술
- ENEPIG 표면처리에서의 Sn-Ag-Cu 솔더조인트 신뢰성: 1. 무전해 Ni-P도금의 두께와 표면거칠기의 영향
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!