학술논문
Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications
이용수 0
- 영문명
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제22권 제4호, 1~5쪽, 전체 5쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2015.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
In high temperature aircraft electronics, aluminium based brazing filler is the prime choice today. Aluminium and its alloys have compatible properties like weight minimization, thermal conductivity, heat dissipation, high temperature precipitation hardening etc. suitable for the aerospace industry. However, the selection of brazing filler for high temperature electronics requires high temperature joint strength properties which is crucial for the aerospace. Thus the selection of proper brazing alloy material, the composition and brazing method play an important role in deciding the final reliability of aircraft electronic components. The composition of these aluminium alloys dependent on the addition of the various elements in the aluminium matrix. The complex shapes of aluminium structures like enclosures, heat dissipaters, chassis for electronic circuitry, in avionics are designed from numerous individual components and joined thereafter. In various aircraft applications, the poor strength caused by the casting and shrinkage defects is undesirable. In this report the effect of various additional elements on Al based alloys and brazing fillers have been discussed.
목차
1. Introduction
2. Classification of Al Alloys
3. Alloying Additions in Al Based Alloys and Fillers
4. Conclusion
Acknowledgements
References
해당간행물 수록 논문
- 마이크로 채널 디자인에 따른 온 칩 액체 냉각 연구
- 알루미늄 기판에 스크린 인쇄한 AlN 후막의 두께 방향으로 열전도도 평가
- 구리 플레이크의 무전해 은도금에서 암모늄계 구리 전처리 용액의 적용법
- 3차원 실장을 위한 TSV의 Cu 전해도금 및 로우알파 솔더 범핑
- Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications
- 카본 CCL에 의한 PCB의 열전달 특성 연구
- 카본 CCL에 의한 PCB의 열전달 특성 연구
- Ce0.8Sm0.2O2 Sol-gel Modification on La0.8Sr0.2Mn0.8Cu0.2O3 Cathode for Intermediate Temperature Solid Oxide Fuel Cell
- 원자층 증착법으로 형성된 Al₂O₃ 박막의 질소 도핑에 따른 실리콘 표면의 부동화 특성 연구
- Via-hole 구조의 n-접합을 갖는 수직형 발광 다이오드 전극 설계에 관한 연구
- 신축성 전자패키징용 강성도 국부변환 polydimethylsiloxane 기판의 탄성계수
- 자동차용 파워 모듈 패키징의 은 소재를 이용한 접합 기술
- 섬(Island) 구조로 이루어진 강성도 국부변환 신축성 기판의 변형 거동
- TSV 구리 필링 공정에서 JGB의 농도와 전류밀도의 상관 관계에 관한 연구
- 자동차용 에어백 센서의 패키징 방법에 따른 신호 전달 해석
- 졸-침투와 감광성 직접-패턴 기술을 이용하여 스크린인쇄된 Pb(Zr,Ti)O3 후막의 하이브리드 제작
- 유연 기판을 이용한 PLC소자 제작을 위한 롤투롤 공정 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!