학술논문
서브 마이크론급 구리 입자의 은도금 공정에 따른 내산화성 강화 연구
이용수 4
- 영문명
- Antioxidation Behavior of Submicron-sized Cu Particles with Ag Coating
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제23권 제3호, 51~56쪽, 전체 6쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2016.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
내산화 특성을 가지는 구리(Cu) 기반의 미세 도전 필러를 제조하기 위하여 서브마이크론급의 은(Ag) 코팅 Cu 입자를 제조하고, 그 내산화 특성을 평가하였다. 평균 크기 0.705μm의 Cu 입자들을 습식 합성법으로 제작한 후, 에틸렌글리콜 용매를 사용한 연속 공정으로 Ag 도금을 실시하여 Ag 도금 Cu 입자를 제조하였다. Ag 도금 공정에서 제어한 주요 변수는 환원제 아스코빅산의 첨가 농도, Ag 전구체 용액의 주입속도 및 혼합 용액의 교반속도였는데, 이들의 변화에 따른 Ag 도금의 특성과 미세한 순수 은Ag 입자의 생성 변화를 관찰하였다. 그 결과 공정변수들을 최적화시킴으로써 불필요한 순수 Ag 입자들이 생성을 막고, Ag 도금 Cu 입자들간의 응집을 억제할 수 있었다. 최적 제조조건에서 제조된 Ag 도금 Cu 입자들은 다소간의 응집을 나타내었으나, 대기중에서 10℃/min의 승온속도로 가열 시 약 225℃에서야 0.1%의 무게 증가를 나타내었고, 150℃의 대기중에서는 75 분까지 무게 증가가 없는 우수한 내산화 특성을 나타내었다.
영문 초록
To fabricate a copper (Cu)-based fine conductive filler having antioxidation property, submicron silver (Ag)-coated Cu particles were fabricated and their antioxidation property was evaluated. After synthesizing the Cu particles of 0.705μm in average diameter by a wet-reduction process, Ag-coated Cu particles were fabricated by successive Ag plating using ethylene grycol solvent. Main process parameters in the Ag plating were the concentration of reductant (ascorbic acid), the injection rate of Ag precursor solution, and the stirring rate in mixed solution. Thus, Ag plating characteristics and the formation of separate fine pure Ag phase were observed with different combinations of process parameters. As a result, formation of the separate pure Ag phase and aggregation between Ag-coated Cu particles could be suppressed by optimization of the process parameters. The Ag-coated Cu particles which were fabricated using optimal conditions showed slight aggregation, but excellent antioxidation property. For example, the particles indicated the weight gain not exceeding 0.1% until 225℃ when they were heated in air at the rate of 10℃/min and no weight gain until 75 min when they were heated in air at 150℃.
목차
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
감사의 글
References
키워드
해당간행물 수록 논문
- 열처리 조건에 따른 무전해 Ni/전해 Cr 이중도금의 계면반응 및 균열성장거동 분석
- ALD YSZ 연료극 중간층 박막 적용을 통한 고체 산화물 연료전지의 성능 향상
- Characterization of Mechanical Property Change in Polymer Aerogels Depending on the Ligand Structure of Acrylate Monomer
- Characteristics of Flexible Transparent Capacitive Pressure Sensor Using Silver Nanowire/PEDOT:PSS Hybrid Film
- 형광 이미징 시스템의 패키징 및 강도 특성 연구
- IoT 적용을 위한 다종 소자 전자패키징 기술
- 스프레이코팅법에 의한 패시베이션 박막이 플렉시블 CIGS 태양전지의 특성에 미치는 영향
- 온도/습도 시험, 온도 싸이클링 시험 및 고온유지 시험에 따른 Package-on-Package의 신뢰성
- Assessment Methodology of Junction Temperature of Light-Emitting Diodes (LEDs)
- 서브 마이크론급 구리 입자의 은도금 공정에 따른 내산화성 강화 연구
- 유연 기판 위 적층 필름의 굽힘 탄성계수 측정
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!