학술논문
수소 도핑효과에 의한 ZnO 맴트랜지스터 소자특성
이용수 3
- 영문명
- Resistive Switching Characteristic of ZnO Memtransistor Device by a Proton Doping Effect
- 발행기관
- 한국마이크로전자및패키징학회
- 저자명
- 간행물 정보
- 『마이크로전자 및 패키징학회지』제27권 제1호, 31~35쪽, 전체 5쪽
- 주제분류
- 공학 > 산업공학
- 파일형태
- 발행일자
- 2020.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
원자층 증착법(ALD: atomic layer deposition)으로 성장된 ZnO n-type 산화물반도체를 이용하여 three terminal memristor (memtransistor) 소자를 제작하여 습도에 따른 그 특성을 관찰하였다. 40 nm 두께의 ZnO 박막을 이용하여 channel width 70 ㎛, length 5 ㎛, back gate 구조의 memtransistor 소자를 제작하여 습도에 (40%, 50%, 60%, 70%) 따른 gate tunable memristive 특성변화를 관찰하였다. 습도가 높아질수록 electron mobility와 gate controllability가 감소하여 수소도핑효과에 의한 carrier 농도가 증가하는 거동의 output curve가 관찰되었다. 60%, 70%의 습도에서 memristive 거동이 관찰되었으며 습도가 높아질수록 on/off ratio는 증가하는 반면 gate controllability가 감소하였다. 60% 습도에서 가장 우수한 특성의 gate tunable memristive 특성을 얻을 수 있었다.
영문 초록
This study demonstrates metal-oxide based memtransistor device and the gate tunable memristive characteristic using atomic layer deposition (ALD) and ZnO n-type oxide semiconductor. We fabricated a memtransistor device having channel width 70 ㎛, channel length 5 ㎛, back gate, using 40 nm thick ZnO thin film, and measured gate-tunable memristive characteristics at each gate voltage (50V, 30V, 10V, 0V, -10V, -30V, -50V) under humidity of 40%, 50%, 60%, and 70% respectively, in order to investigate the relation between a memristive characteristic and hydrogen doping effect on the ZnO memtransistor device. The electron mobility and gate controllability of memtransistor device decreased with an increase of humidity due to increased electron carrier concentration by hydrogen doping effect. The gate-tunable memristive characteristic was observed under humidity of 60% 70%. Resistive switching ratio increased with an increase of humidity while it loses gate controllability. Consequently, we could obtain both gate controllability and the large resistive switching ratio under humidity of 60%.
목차
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
감사의 글
References
해당간행물 수록 논문
- 수치해석을 이용한 FCCSP용 Embedded PCB의 Cavity 구조에 따른 거동특성 연구
- 실험 및 수치해석을 이용한 SLP (Substrate Like PCB) 기술에서의 마이크로 비아 신뢰성 연구
- Ag/Sn/Ag 샌드위치 구조를 갖는 Backside Metallization을 이용한 고온 반도체 접합 기술
- 수소 도핑효과에 의한 ZnO 맴트랜지스터 소자특성
- Cu-SiO2 하이브리드 본딩
- 오류정정
- 나노 소재 기반의 전기장 투과 전극에 관한 연구동향
- 광화학증착법에 의한 직접패턴 비정질 TiOx 박막의 제조 및 저항변화 특성
- O2 플라즈마 전처리 및 후속 열처리 조건이 Ti 박막과 WPR 절연층 사이의 계면 접착력에 미치는 영향
- Solid Epoxy를 이용한 패키지 및 솔더 크랙 신뢰성 확보를 위한 실험 및 수치해석 연구
참고문헌
관련논문
공학 > 산업공학분야 NEW
- 반려동물의 행동 분석 및 질병 예측을 위한 인공지능 모델링
- SWOT과 PESTLE 방법론을 이용한 C커머스의 글로벌시장 성공진출 요인 도출
- 다이나믹어포던스 강화를 위한 디지털파라메트릭 디자인 연구
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!