학술논문
Assessment of Radiation Shielding Ability of Printing Materials Using 3D Printing Technology
이용수 47
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 이홍연(Hongyeon Lee) 김동현(Donghyun Kim)
- 간행물 정보
- 『한국방사선학회 논문지』 제12권 제7호, 909~917쪽, 전체 9쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2018.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
3D 프린팅 기술은 4차산업 혁명 중 제조업의 혁신적인 기술로서 전망되고 있으며, 현재 바이오 ∙ 의료분야를 포함한 다양한 분야에서 활용되고 있다. 본 연구에서는 이러한 3D 프린팅 기술을 이용한 제작 원료에 대한 방사선 차폐능을 평가하고자 몬테카를로 전산모사를 통해 프린팅 원료에 대한 검증을 수행하였다. 현재 범용으로 사용되는 FDM 방식의 3D 프린터에서 이용 가능한 원료들을 대상으로 하였으며, ICRU phan tom과 차폐체를 모의 모사한 후 방사선의 종류 및 에너지에 따른 입자 플루언스 평가를 통해 차폐 효과에 대해 분석하였다. 그 결과, 광자선의 경우 에너지 증가에 따라 차폐 효과는 점차 감소되는 경향을 보였고, 원료별 차폐 효과는 TPU, PLA, PVA, Nylon, ABS 순서로 점차적으로 낮아지는 결과를 나타냈다. 중성자선
의 경우, 5~10 mm의 낮은 두께에서 반대로 선속이 증가되는 현상을 보였으나, 일정 두께 이상에서는 유효한 차폐 효과를 나타내었으며, 프린팅 원료별 차폐 효과는 Nylon, PVA, ABS, PLA, TPU 순서로 점차 낮아지는 결과를 보였다.
영문 초록
3D printing technology is expected to be an innovative technology of the manufacturing industry during the 4th
industrial revolution, and it is being used in various fields including biotechnology and medical field. In this
study, we verified the printing materials through Monte Carlo simulation to evaluate the radiation shielding ability
of the raw material using this 3D printing technology. In this paper, the printing materials were selected from the
raw materials available in a general-purpose FDM-based 3D printer. Simulation of the ICRU phantom and the
shielding system was carried out to evaluate the shielding effect by evaluating the particle fluence according to
the type and energy of radiation. As a result, the shielding effect tended to decrease gradually with increasing
energy in the case of photon beam, and the shielding effect of TPU, PLA, PVA, Nylon and ABS gradually
decreased in order of materials. In the case of the neutron beam, the neutron intensity increases at a low
thickness of 5 ~ 10 mm. However, the effective shielding effect is shown above a certain thickness. The shielding
effect of printing material is gradually increased in the order of Nylon, PVA, ABS, PLA and TPU Respectively.
목차
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHOD
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
해당간행물 수록 논문
- A Comparison Analysis of CT Effective Dose and Image Quality according to Abdominal Diameter
- Assessment of Effective Dose for General Radiography of Adults Based on Diagnostic Reference Level(DRL) by Using PCXMC Program
- A Study on Safety Management Inspection of Diagnostic X-ray System
- Journal of the Korean Society of Radiology
- Assessment of Radiation Shielding Ability of Printing Materials Using 3D Printing Technology
- Monte-carlo Simulation for X-ray Photon Counting using MPPC Arrays
- Analysis of Health Insurance Standards and Utilization of MRI in Korea:
- Analysis of the Relationships according to the Frame (f/s) Change of Cine Imaging in Coronary Angiographic System: With Focus on FOV Enlargement and Live Zoom
- The Study on Correlation between Carotid IMT and Colon Polyps
- Shielding Capability Evaluation of Mobile X-ray Generator through the Production assembled Shield
- Cross Calibration of Dual Energy X-ray Absorptiometry Equipment for Diagnosis of Osteoporosis: between Domestic Manufacturers and Global Manufacturers
- MDCT Angiography of the Subclavian Artery Thrombosis of the 3D Findings
- A Study on the Fabrication of bone Model X-ray Phantom Using CT Data and 3D Printing Technology
- Analysis of Satisfaction and Problems of Clinic Radiological Technologist on the Supplementary Education
- Error Analysis of General X-ray Examination by Using Simulation Training
- 한국방사선학회 논문지 12권 7호 목차
- Analysis of the Dead Layer Thickness effect and HPGe Detector by Penelope Simulation
- Calculation of Effective Dose on Domestic Chest PA X-ray Examinations
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!