학술논문
Shielding Capability Evaluation of Mobile X-ray Generator through the Production assembled Shield
이용수 37
- 영문명
- 발행기관
- 한국방사선학회
- 저자명
- 김승욱(Seung-Uk Kim) 안병주(Byeoung-Ju Han)
- 간행물 정보
- 『한국방사선학회 논문지』 제12권 제7호, 895~908쪽, 전체 14쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2018.12.30
4,480원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
의료방사선의 관리에서 가장 중요한 사항은 진료의 적정성을 확보하면서 방사선위해를 최소화하는 것이다. 국제원자력기구는 진단방사선 분야의 선량 감소 방법에 대한 지침서를 만들어 환자피폭선량을 측정하여 각 국가에 사용하도록 권고하고 있다. 또한 국내에서도 우리나라의 실정에 맞게 각 촬영마다 환자 피폭 선량값을 연구하여 진단참고준위를 제시하였다.환자가 질병 때문에 방사선 진료를 받는 것은 방사선 때문에 일어날 수 있는 위해보다 그것으로 얻어지는 이익이 크기 때문이다. 병실 이동검사와 같이 자신의 질병과 무관하게 방사선에 노출되는 환자 및 보호자들의 피폭을 줄이기 위해서는 환자, 방사선사, 의사 및 의료기관의 노력이 가장 중요하다.이에 본 연구에서는 개선방안의 일환으로 MG로 병실의 이동 검사에 대한 문제
점을 제시하고 이 문제점을 근거로 하여 산란선으로 예상되는 공간선량률을 분석하였다. MG에 자체 개발한 방어벽을 설치하여 방어벽 설치 전후의 공간선량률을 측정하여 그 감소율을 분석하였다. 최종적으로 이 자료들을 종합하여 MG에 방어벽을 부착하여 방사선사의 병실이동에 대한 부담감의 최소화, 병실 이동검사로 인한 방사선사, 환자 및 보호자를 방사선 노출로부터 보호하고, 검사로 인한 주위 환자 및 보호자의 불편을 최소화하는데 의의가 있다. 이와 같은 개선안에 대해 보다 효율적인 시행을 위하여 MG에 대한 새로운 법제도가 마련되면, 향후 예상되는 비용, 인력, 고객만족도 및 더욱 더 안정적인 피폭감소방안이 정착될 것이라 사료된다.
영문 초록
As modern science is developed and advanced, examination and number of times using radiation are increasing
daily. General diagnostic X-ray generator is installed on stationary form, But X-ray generator was developed
because patient who is in the intensive care unit, operation room, emergency room can not move to general x-ray
room. What we examine patient by x-ray generator is certainly necessary, So patient exposure is inevitable. but
reducing radiation exposure is highly important matter about radiation technology, guardian, patient in the same
hospital room, nurse etc. For this reason, rule regarding safety control of diagnostic x-ray generator revised for
radiation worker, patient and protector proclaim that mobile diagnostic x-ray shield must placed in case of
examine different location excluding operation room, emergency room, intensive care unit. But, radiogical
technologist is having a lot of difficulties to examine with mobile x-ray generator, diagnostic x-ray shield
partition, image plate and lead apron. So, when we use x-ray generator, we manufacture shield tools can be
attached to the mobile x-ray generator On behalf of x-ray shield partition and conduct analysis and in comparison
to part of body and distribution of dose rate and find way to reduce radiation exposure through distribution of
dose rate of patient within the radiogical technologist, medical team. Mobile x-ray generator aimed at
SHIMADZU inc. R-20, We manufactured equipment for shielding x-ray scattered x-ray by installing shielding
wall from side to side based on support beam on the mobile x-ray generator. Shielding wall when moving can
be folded and designed to expand when examine. Experiment measured five times in each by an angle for dose
rate of eyes, thyroid, breast, abdomen and gonad on exposure condition of upper and lower extremity, chest,
abdomen which is examined many times by mobile x-ray generator. We used dosimeter RSM-100 made by
IJRAD and measured a horizontal dose rate by body part. The result of an experiment, shielding decreasing rate
of the front and the rear showed 77 ~ 98.7%. Therefore using self-production shielding wall reduce scattered
x-ray occurrence rate and confirm can decrease exposure dose consequently. Therefore, through this study,
reduction result which is used shielding wall of self-production will be a role of shielding optimization and it
could be answer about reduction of medical exposure recommended by ICRP 103.
목차
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
해당간행물 수록 논문
- A Comparison Analysis of CT Effective Dose and Image Quality according to Abdominal Diameter
- Assessment of Effective Dose for General Radiography of Adults Based on Diagnostic Reference Level(DRL) by Using PCXMC Program
- A Study on Safety Management Inspection of Diagnostic X-ray System
- Journal of the Korean Society of Radiology
- Assessment of Radiation Shielding Ability of Printing Materials Using 3D Printing Technology
- Monte-carlo Simulation for X-ray Photon Counting using MPPC Arrays
- Analysis of Health Insurance Standards and Utilization of MRI in Korea:
- Analysis of the Relationships according to the Frame (f/s) Change of Cine Imaging in Coronary Angiographic System: With Focus on FOV Enlargement and Live Zoom
- The Study on Correlation between Carotid IMT and Colon Polyps
- Shielding Capability Evaluation of Mobile X-ray Generator through the Production assembled Shield
- Cross Calibration of Dual Energy X-ray Absorptiometry Equipment for Diagnosis of Osteoporosis: between Domestic Manufacturers and Global Manufacturers
- MDCT Angiography of the Subclavian Artery Thrombosis of the 3D Findings
- A Study on the Fabrication of bone Model X-ray Phantom Using CT Data and 3D Printing Technology
- Analysis of Satisfaction and Problems of Clinic Radiological Technologist on the Supplementary Education
- Error Analysis of General X-ray Examination by Using Simulation Training
- 한국방사선학회 논문지 12권 7호 목차
- Analysis of the Dead Layer Thickness effect and HPGe Detector by Penelope Simulation
- Calculation of Effective Dose on Domestic Chest PA X-ray Examinations
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!