학술논문
TiO₂가 코팅된 Polyethylene 입자를 이용한 페놀과 톨루엔의 광분해
이용수 6
- 영문명
- Photo-degradation of Phenol and Toluene by Using the TiO₂-coated Polyethylene Particles
- 발행기관
- 강원대학교 산업기술연구소
- 저자명
- 김동주(Kim Dong Joo) 최상근(Choi Sang Keun) 조준형(Cho Jun Hyung) 김교선(Kim Kyo Seon)
- 간행물 정보
- 『산업기술연구』vol.24, 133~138쪽, 전체 6쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2004.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The photodegradation of phenol and toluene with the Ti0₂-coated polyethylene (PE) particles were investigated in the slurry type photocatalytic reactor, changing the Ti0₂ particle sizes, initial phenol and toluene concentrations, and the oxygen flow rate. The nano-sized Ti0₂ photocatalyst particles were prepared by the diffusion flame reactor and they were coated onto PE particles by using the hybridization system for the efficient recollection of Ti0₂- coated particles after photodegradation experiments. The degradation efficiencies of phenol and toluene with the Ti0₂-coated PE particles were more than 90% after photodegradation of 80 minutes for most cases. The efficiencies of photodegradation with the Ti0₂-coated PE particles were found to be lower than those by the pure Ti0₂ particles by 50%, because of the decrease in specific surface area of Ti0₂ particles in PE particles.
목차
Abstract
1. 서론
2. 실험방법
3. 결과 및 토의
5. 결론
참고문헌
키워드
해당간행물 수록 논문
- Three Common Subunits in the Editing Domains of Class Ia tRNA Synthetases
- 쇄석의 진동다짐 특성에 관한 실험적 고찰
- 春川댐 放流時 橋梁의 安定性 檢討를 위한 水理模型實驗 硏究
- Gradient Guided 탐색을 이용한 고속 CDMA 다중사용자 검출
- 액정디스플레이(LCD) 판넬유리 운반로봇의 진동저감에 대한 연구
- TiO₂가 코팅된 Polyethylene 입자를 이용한 페놀과 톨루엔의 광분해
- 인터넷에서의 품질지원형 서비스 전망
- Enterobacter sp.의 다당 생산에 미치는 통기ㆍ교반의 단계적 증기 효과
- VOD 시스템 상에서 P2P 프록시 기반의 패칭기법
- Active Stick 제어기 개발에 관한 연구
- 수치모형실험을 통한 콘크리트 구조물의 결함탐지에 관한 연구
- 경사진 사석층의 지지력에 관한 원심모형실험 및 수치해석
- 패킷 다이버시티를 이용한 무선 상향 링크의 성능 개선
- 풍력발전기 축소 구조 모델의 진동특성 연구
- 보안성과 유연성을 갖춘 데이터 공유 방안
- 원심모형시험에 의한 복개터널 복공의 토압특성에 관한 연구
- AACH 를 이용한 고순도 알루미나 분말 제조
- HPGL를 이용한 컴퓨터 제어 마킹기 설계
- 기존 세굴심 산정공식 적용을 위한 모형실험과의 비교 연구
- 알루미늄 튜브 하이드로포밍에서의 예비 굽힘 공정의 효과에 관한 연구
참고문헌
관련논문
공학 > 공학일반분야 BEST
더보기공학 > 공학일반분야 NEW
- 한국화재소방학회논문지 Vol.38 No.2 목차
- 딥러닝 기술을 적용한 지능형 CCTV의 초기 화재 검출 방안에 관한 연구
- 설치 방법에 따른 스프링클러 분무의 살수밀도 분포 균일도 개선
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!