학술논문
사출성형 공정에서 유발되는 냄새의 후각 감성 특성
이용수 31
- 영문명
- Olfactory Sensitivity Characteristics of Odors from Injection Molding Processing
- 발행기관
- 한국산업경영시스템학회
- 저자명
- 류영재(Young-Jae Ryu)김보성(Bo-Seong Kim) 이예현(Ye-Hyun Lee) 곽승현(Seung-Hyun Kwak)서상혁(Sang-Hyeok Seo) 류태범(Tae-Beum Ryu) 민병찬(Byung-Chan Min)
- 간행물 정보
- 『산업경영시스템학회지』제39권 제4호, 67~71쪽, 전체 5쪽
- 주제분류
- 경제경영 > 경영학
- 파일형태
- 발행일자
- 2016.12.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The purpose of this study was to explore olfactory sensitivity of odors from injection molding processing. To do this, the experiment was carried out in an injection molding factory, and participants were exposed to the environment where odor-substances (Formaldehyde, Benzene, Toluene, Ethylbenzene, Xylene, Styrene) exist. In addition, we used the subjective scale using semantic adjectives as an olfactory sensitivity. As a result, the assessment structure of olfactory sensitivity was composed of eight factors (irritant, thermal, tense, unique, like-dislike, active, stable, masculine), and the main factor which was irritant characteristics explained 20% of the total olfactory sensibility. These results suggested that odors from injection molding processing would cause more negative emotional responses than the flavor which is mainly used in olfactory sensitivity. This study, as a basic study of the improvement in a factory environment for the efficiency of work, has limits in that it was conducted to the extent of identifying the olfactory sensitivity structure of those who were at a laboratory and who were exposed to the environment of odor substance induced in the injection molding processing. Therefore, for the method of removing malodorous substance, the effect of materials which can neutralize it, and the comparison of a direct performance in the environment where negative sensitivity structure exists, a series of studies which aim to improve the environment of injection molding factories, such as performance assessment in the environment of a factory and an office need to be conducted. It is expected that when these studies are put together, the improvement guidelines will be provided as a type that can maximize the effectiveness of work in the factory environment where injection molding processing is done.
목차
1. Introduction
2. Method
3. Results
4. Discussion
키워드
해당간행물 수록 논문
- 디스플레이산업에서 수주생산방식의 개선 및효율화 제고 방안
- 공동물류 환경의 혼합추천시스템 기반 차주-화주 중개서비스 구현
- 쌍대비교를 활용한 기업 유형 분류에 따른 보안 전략 우선순위 결정
- 가치전략 중점의 변화가 재무성과에 미치는 영향
- 순회판매원문제를 위한 분산유전알고리즘 성능평가
- Profile의 Composite와 Multiple Single-Segment Control의 비교 연구
- 불확실성하에서의 확률적 기법에 의한 판매 및 실행 계획 최적화 방법론 : 서비스 산업
- 판매자-구매자 생산-재고통합 문제를 위한 Mixed Approach
- 외부 R&D가 혁신 효율성에 미치는 영향 분석 : 국내 제조 산업을 중심으로
- 사출성형 공정에서 유발되는 냄새의 후각 감성 특성
- 전자제품 제조사 관점에서의 공급사슬 특성을 고려한 재고비용 산정 기준의 제시
- 산학 기술 협력 참여기업의 참여목적, 참여프로그램, 만족도 평가
- 대학생의 학업형태 및 개인특성에 따른 스트레스 발생요인 및 대처방식 비교
- 플랜트 프로젝트 일정위험 예외상황 예측 및 평가
- 야전 치명고장자료를 이용한 함정전투체계 신뢰성 분석 및 활용 방안
- 음각 점진성형에서 치수정밀도에 영향을 미치는 형상 파라미터 분석
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!