학술논문
TiN 피막처리된 Co-Cr계 교정용 선재의 물성
이용수 0
- 영문명
- THE PHYSICAL PROPERTIES OF TIN ION-PLATED CO-CR(ELGILOY) ORTHODONTIC WIRES
- 발행기관
- 대한치과교정학회
- 저자명
- 김정민(Jung-Min KIM) 권오원(Oh Won-KWON) 김교한(Kyo-Han KIM)
- 간행물 정보
- 『The Korean Journal of Orthodontics』제28권 제3호, 371~377쪽, 전체 7쪽
- 주제분류
- 의약학 > 기타의약학
- 파일형태
- 발행일자
- 1998.06.30
무료
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
TiN 피막처리된 Elgiloy(Co-Cr계 선재)의 임상 적용을 검토하기 위하여 제조된 상태의 Elgiloy, 250°C에서 30분간 가열처리된 Elgiloy, TiN 피막처리된 Elgiloy 각각의 4가지trmper, 그리고 비교를 위하여 스테인레스강 선재의 인장강도와 경도를 측정한 결과 다음과 같은 결론을 얻었다. • 인장강도는 모든 temper에서 TiN 피막처리된 군이 가장 높았고, 가열처리된 군, 제조상태의 군의 순으로 나타났으나 가열처리된 군과 제조상태의 군가에는 통계학적으로 유의한 차가 없었다(p<0.05). • 인장강도는 각 temper에서 TiN 피막처리시 제조상태의 Elgiloy보다 약 10kg/mm2 정도의 증가를 보였다. • 경도값은 Yellow, Green, 그리고 Red temper 에서는 TiN 피막저리된 군이 가장 높았고, 가열처리된 군, 제조상태의 군의 순으로 나타났으나(p<0.05), But temper에서는 가열처리된 군과 제조상태의 군간에 통계학적으로 유의한 차가 없었다(p<0.05). • 경도값은 각 temper에서 TiN피막처리시 제조상태 Elgiloy보다 약 50-90VHN 정도의 증가를 보였다. • 스테인레스강의 선재와 비교할 때 제조상태에서는 Red temper와, TiN 피막처리한 경우는 Green temper와 비슷한 인장강도를 나타내었다.
영문 초록
To estimate the possibility of clinical application of TiN ion-plated Elgiloy(Co-Cr wire), measurements of tensile strength and hardness were made on the four tempers on each of the manufactured Elgiloy, the (heat-treated) Elgiloy for 30 minutes at 250°C and the TiN ion-plated Elgiloy. For comparison, the tensile strength and hardness of Stainless Steel wires were also measured. The following are the results of the study: • In the 4 tempers, tensile strength was the greatest in the TiN ion-plated group, followed by the heat-treated Elgiloy group and the manufactured Elgiloy group, but no statistical difference was noticed between heat-treated and manufactured Elgiloy groups(P>0.05). • In each temper, tensile strength- of ion-plated Elgiloy increased- about l0kgf/mm2 in comparison with the values of the manufactured Elgiloy. • In yellow, green and red tempers except the blue, hardness was the greatest in ion-plated group. In the blue temper, there was no statistical difference between heat-treated and manufactured Elgiloy groups(P>0.05). • In each temper, hardness of ion-plated Elgiloy increased about 50-90VHN in comparison with the values of the manufactured Elgiloy. • The tensile strength of Stainless Steel wire was similar to that of the red temper of manufactured Elgiloy and the green temper of ion-plated Elgiloy.
목차
해당간행물 수록 논문
- 유성견 소구치 정출시 치아 및 치주 조직의 초기 조직학적 변화 및 재생에 관한 연구
- 유년기 골격성 Ⅲ급 부정교합자에서 이모장치의 효과에 관한 유한요소분석법적 연구
- 치아이동에 의한 백서 삼차신경감각핵군내 c-Fos의 발현
- 근첨하 분절 골절단술을 병행한 Ⅲ급 야악 전돌증의 교정치료 증례
- 골결손과 치주질환 유도 후 성견 절치의 실험적 함입이동시 치주조직의 반응
- 골유착 이전에 악정형력이 임프란트 주위조직에 미치는 영향
- TiN 피막처리된 Co-Cr계 교정용 선재의 물성
- 제 Ⅲ급 부정교합자의 악교정 수술후 골격적 재발 양상에 관한 연구
- Intrusion arch wire activation시 상악 견치에 가해진 초기응력의 유한요소법을 통한 고찰
- 비발치로 치료된 Ⅰ급 부정교합의 형태적 특성
- 초경이후 경과시간에 따른 골성숙도의 변화
- 글라스 아이오노머 시멘트와 불소함유 레진의 불소유리에 관한 연구
- 교정적 치아이동 후 치아동요도 변화에 관한 연구
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!