학술논문
교정용 와이어의 비틀림 모멘트
이용수 19
- 영문명
- Torsional moment of orthodontic wires
- 발행기관
- 대한치과교정학회
- 저자명
- 최광철(Kwang-chul Choy) 김경호(Kyung-Ho Kim) 박영철(Young-Chel park) 강창수(Chang-Soo Kang)
- 간행물 정보
- 『The Korean Journal of Orthodontics』제30권 제4호, 467~473쪽, 전체 7쪽
- 주제분류
- 의약학 > 기타의약학
- 파일형태
- 발행일자
- 2000.08.31
무료
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
각형 호선이 edgewise 브라켓에 삽입되면 first, second order는 bending에 의해, third order는 torsion(비틀림)에 의해 3차원적인 force system이 발생한다. Bending에 관하여는 분석적 그리고 실험적인 많은 연구가 보고 되어 있는 반면 비틀림에 관해서는 상대적으로 많은 연구가 이루어 지지 않았다. 본 연구의 목적은 각형 와이어의 재료와 단면의 형태가 와이어의 비틀름 모멘트에 어떻게 영향을 주는지를 이론적, 실험적으로 밝혀서 임상적으로 적적한 모멘트를 가할 때 호선의 재료와 굵기를 합리적으로 선택할 수 있도록 하는데 있다. 실험재료로는 third order 조적을 위해 가장 많이 사용하는 호선을 사용하였다. 크기별로 0.06x0.022, 0.017x 0.025, 0.019x0.025인치 그리고 재료로는 stainless steel(Ormco), TMA (Ormco), NiTi (Ormco), 그리고 braided stainless steel (DentaFlex, Dentaurum) 네 가지를 사용하여 총 12개의 조합을 사용하였다. Torsion formula를 이용하여 비틀림 강성 (torque/twist rate)을 계산하였고 toraue gauge를 이용하여 비틀림 강성, 항복 비틀림 모멘트 (yield torsional moment), 그리고 최대 비틀림 모멘트 (ultimate torsional moment)를 측정하였다. Torsion formula에 의하면 비틀림 강성(T/θ)은 재료적인 특성(G)과 호선의 단면의 특성(J)에 비례하고 호선의 길이(L)에 반비례한다. 대부분의 실험치는 이론적인 값과 비슷하게 나타났다.
영문 초록
As a rectangular wire is inserted into edgewise brackets the wire exerts a force system three-dimensionally. The force system may include bending force in first and second orders and a torsional force in third order. Analytical and experimental studies on bending force have been introduced, but information about torsion is still lack. The purpose of this study was to estimate the torsional´moment in the force system of rectangular arch wires through theoretical and experimental studies. Wires most frequently used for third order control were selected as study materials. Cross sections of 0.016X17.022, 0.017x0.025, 0.019x0.025 inch rectangular wires in four different materials such as stainless steel (O mco), TMA (Ormco), NiTi (Ormco), and braided stainless steel (DentaFlex, Dentaurum) were used. The torque/twist rate of each test material was calculated using the torsion fotiuula Torque/twist rate, yield torsional moment, and ultimate torsional moment were measured with a torque gauge. The torsion formula assesses that the torque,/twist rate (T/0) is proportional to the characteristics of material (G) and cross section (J), and is inversely proportional to the length of wire (L). Most experimental results conesponded with the formula. The relative stiffness was calculated for reference to a logical sequence of wire changes.
목차
키워드
해당간행물 수록 논문
- Anterior j hook headgear를 이용한 상악골 성장억제에 관한 연구
- 측두하악장애환자에서 교합안정장치가 하악골위치변화에 미치는 영향에 관한 연구
- 백서에서 실험적 치아이동시 임신이 치조골 교체(Turnover)에 미치는 영향에 대한 연구
- 치주인대세포 배양에서 estrogen이 growth hormone receptor의 발현유도에 미치는 영향
- Three-piece basal archwire를 이용한 치열 정중선 불일치의 교정치료
- 완전 편측성 순구개열자의 두 개저 성장과 상, 하악골 위치의 상관 관계에 관한 연구
- 교정용 와이어의 비틀림 모멘트
- 침수 및 열순환에 따른 레진브라켓 Wing의 파절강도 변화
- 치과용 금합금의 표면처리에 따른 교정용 브라켓의전단결합강도 변화
- 재생 과정이 니켈-티타늄호선의 물리적 성질과 표면 거칠기에 미치는 영향
- BAPN으로 유도된 구개파열 백서의 osteonectin 발현 양상에 대한 연구
- 교정적 치아 이동 중 치은열구액의 Interleukin-1ß의 발현
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!