학술논문
교정선의 종류, 결찰방법, 타액의 유무에 따른 마찰력의 비교연구
이용수 10
- 영문명
- A comparative study of frictional forces according to orthodontic wires and ligation method under dry and wet conditions
- 발행기관
- 대한치과교정학회
- 저자명
- 한정숙(Jung-Suk Han) 이진우(Jin-woo Lee) 차경석(Kyung-Suk Cha)
- 간행물 정보
- 『The Korean Journal of Orthodontics』제31권 제2호, 271~281쪽, 전체 11쪽
- 주제분류
- 의약학 > 기타의약학
- 파일형태
- 발행일자
- 2001.04.30
무료
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
치아에 부착된 bracket이 교정선을 따라 이동할 때 필연적으로 bracket과 교정선, 결찰재 사이에 마찰력이 발생된다. 이에 저자는 동일한 bracket내에서 교정선의 종류, 결찰방법, 건조와 타액상태에 따른 마찰력 차이, 타액의 윤활제로서의 기능을 살펴보기 위해 본 연구를 시행하게 되었다. 본 실험에 사용된 bracket은 .018 x ,025 slot의 상악 견치용 standard edgewise bracket(RMO, USA)이며, 교정선은 .016 , .016 x .022 크기의 Cobalt-chromium(Elgiloy : RMO, USA), Nickel-titanium(Ni-Ti)(ORTHOLLOY : Goldstar Cable Co., KOREA), Beta-titanum(TMA : ORMCO Co., USA)의 2가지형태의 3종을 이용하여 활주할때의 마찰력을 만능시험기(Instron, M 1000 EC)를 사용하여 계측하여 다음과 같은 결론을 얻었다. 1. 각각의 동일조건하에서 교정선의 재질에 따른 마찰력은 Co-Cr, Ni-Ti, β-Ti순으로 증가하였다. 단, 타액상태에서 elastomeric으로 결찰한 .016 군에서는 예외이다. 2. 각 조건하(건조/ 타액상태, .016 / ,016 x .022 )에서 결찰방법에 따른 마찰력은 elastomeric 보다 stainless steel 결찰에서 더 크게 나타났다(p<0.05). 3. 각각의 교정선과 결찰방법에서 타액 유무에 따른 마찰력은 stainless steel로 결찰한 .016 Co-Cr, Ni-Ti, β-Ti는 타액상태에서 감소하나, stainless steel로 결찰한 .016 x .022 Co-Cr, Ni-Ti, β-Ti는 타액상태에서 증가하였다(p<0.05). 4. 각 조건하(건조/ 타액상태, elastomeric/ stainless steel 결찰) .016 과 .016 x .022 교정선 사이의 마찰력은 .016 x .022 교정선에서 증가하였다(p<0.05).
영문 초록
The purpose of this study was fourfold - to evaluate the general laws of friction applied to orthodontic conditions, to compare archwire materials under these controlled conditions, to compare ligation method, and to measure the effect of the artificial saliva on friction with these materials Three wire alloys (Cobalt-chromium, Nickel-titanium, Beta-titanium) in two size wires (.016 , .016 x.022 ) were examined respect to the bracket (.018 x.025 standard), and two ligature material (stainless steel, elastomeric) in dry and wet conditions The results were as follows, 1. The order of frictional force against alloy materials was Co-Cr (lowest), Ni-Ti, and β-Ti(highest) - with the exception of elastomeric ligation under wet conditions. 2. S.S. ligation gave r se to significantly greater friction than elastomeric ligation did. 3. Testing in the presence of saliva, rather than in dry conditions, decreased the frictional force for S.S. ligation with .016 Co-Cr, Ni-Ti, β-Ti. but, increased the frictional force for S.S. ligation with .016 X .022 Co-Cr, Ni-Ti, / β-Ti. 4. .016 X.022 wire generated more friction than .016 wire.
목차
해당간행물 수록 논문
- 에스트로젠과 프로게스테론이 골모세포의 증식과 활성에 미치는 영향
- 교정선의 종류, 결찰방법, 타액의 유무에 따른 마찰력의 비교연구
- 백서의 실험적 치아이동시 열충격 단백의 발현
- 교정력이 골유착성 티타니움 임프란트의 초기 고정에 미치는 영향에 관한 실험적 연구
- 안모의 수직고경에 영향을 미치는 교정적 요인에 관한 연구
- 한국인 성인의 교근 두께에 관한 초음파검사적 연구
- 치조골 상실에 따른 three-peice base arch appliance를 이용한 상악전치부 intrusion에 대한 3차원 유한요소법적 연구
- Plasma arc light를 이용한 bracket 부착시의 전단결합강도와 파절양상의 유형
- 최근 10년간 조선대학교 부속치과병원 교정과에 내원한 부정교합 환자에 관한 역학적 연구(1990-1999)
- 성장기 골격성 Ⅰ급 부정교합 환자의 정모두부방사선 계측의 특징
- Segmented TMA T-loop spring에 의한 견치 후방이동시의 응력분포에 관한 광탄성법적 분석
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!