- 영문명
- Freezing-Prediction System of Outdoor Hori zontal Fire Pipe Using Metal Heater
- 발행기관
- 한국화재소방학회
- 저자명
- 김보형 곽준재 서상민 김용배 남준석 임성식
- 간행물 정보
- 『한국화재소방학회논문지』Vol.37 No.4, 44~51쪽, 전체 8쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2023.08.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

국문 초록
배관 내부 물의 유동이 거의 없는 옥외 소방 배관의 겨울철 한파로 인한 동파를 방지하기 위해 열선을 감고 보온재를 덮는 방식이 주로 사용되어왔다. 하지만 열선 외피의 경화, 누전 및 합선 등으로 인한 화재 발생, 유지ㆍ보수의어려움 등의 단점을 해결하고자 메탈히터를 이용한 동파 방지 시스템이 개발되었다. ANSYS CFX를 기반으로 배관의 관경보, 온재 두께, 외기 온도를 변화시켜 열유동 해석을 수행하였으며, 이 결과를 토대로 Minitab 소프트웨어를활용하여 수온 예측 회귀식을 도출하였다. 본 연구에서는 배관 중심부의 수온이 0 ℃ 이상으로 유지되는 지점까지를동파 방지를 위한 메탈히터의 권장 설치간격으로 정의하였다. 실험과 동일한 조건에서 열유동 해석과 회귀분석을통해 얻은 권장 설치간격은 각각 2.6 m, 2.7 m이었으며, 실제 실험을 통해 도출한 권장 설치간격인 2.9 m와 최대 0.3 m의차이를 보였다.
영문 초록
The method of winding a heating wire and covering it with insulation materials has been widely used to prevent freezingduring winter in outdoor firefighting pipes, which have a low amount of water flowing inside. However, several issues mustbe considered when using a heating wire, such as the hardening of its sheath, the outbreak of fire owing to electric leakageor short-circuiting, and difficulties in maintenance and repair. A freeze-protection system using a metal heater was developedto solve these problems. Thermal flow was analyzed using ANSYS CFX by varying the pipe diameter, insulation thickness,and outdoor temperature. Based on the obtained results, a regression equation was derived to predict the water temperatureusing the Minitab software. This study defined the recommended installation interval of the metal heater for frost preventionas the point at which the temperature inside the core of the pipe was maintained above 0 °C or higher. Under the sameexperimental conditions, the recommended installation intervals obtained via thermal fluid and regression analyses were 2.6and 2.7 m, respectively. These values differed from the recommended installation interval of 2.9 m, derived from the actualexperiment, by a maximum of 0.3 m.
목차
1. 서 론
2. 메탈히터 동파 방지 시스템 열유동 해석
3. 메탈히터 동파 방지 시스템 예측
4. 메탈히터 동파 방지 시스템 실험
5. 결 론
후 기
References
해당간행물 수록 논문
- 화재시뮬레이션에서 연기농도에 대한 수치모델 불확실도 연구
- 한국화재소방학회논문지 Vol.37 No.4 목차
- 등하교 안전사고 경향 분석
- 소화용수 공급을 위한 연결송수관설비 활용 개선방안에 관한 연구
- 메탈히터를 이용한 옥외 수평 소방 배관 동파 예측 시스템 연구
- CAFS 최적공기포비 도출을 위한 일반화재 및 유류화재 적용 실험
- 비화재 조건에서의 연기 및 일산화탄소 반응 특성 분석
- 벽지 화재의 표면 연소 현상 및 연기밀도 특성에 관한 실험적 연구
- 수직 개구부로 연결된 2개의 구획실에서 화원 조건이 개구부 유동 속도 및 고온 가스층 특성에 미치는 영향