학술논문
Feasibility on Statistical Process Control Analysis of Delivery Quality Assurance in Helical Tomotherapy
이용수 2
- 영문명
- Feasibility on Statistical Process Control Analysis of Delivery Quality Assurance in Helical Tomotherapy
- 발행기관
- 대한방사선과학회(구 대한방사선기술학회)
- 저자명
- 장경환(Kyung Hwan Chang)
- 간행물 정보
- 『방사선기술과학』제45권 제6호, 491~502쪽, 전체 12쪽
- 주제분류
- 의약학 > 방사선과학
- 파일형태
- 발행일자
- 2022.12.31
4,240원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
영문 초록
The purpose of this study was to retrospectively investigate the upper and lower control limits of treatment planning parameters using EBT film based delivery quality assurance (DQA) results and to analyze the results of statistical process control (SPC) in helical tomotherapy (HT). A total of 152 patients who passed or failed DQA results were retrospectively included in this study. Prostate (n = 66), rectal (n = 51), and large-field cancer patients, including lymph nodes (n = 35), were randomly selected. The absolute point dose difference (DD) and global gamma passing rate (GPR) were analyzed for all patients. Control charts were used to evaluate the upper and lower control limits (UCL and LCL) for all the assessed treatment planning parameters. Treatment planning parameters such as gantry period, leaf open time (LOT), pitch, field width, actual and planning modulation factor, treatment time, couch speed, and couch travel were analyzed to provide the optimal range using the DQA results. The classification and regression tree (CART) was used to predict the relative importance of variables in the DQA results from various treatment planning parameters. We confirmed that the proportion of patients with an LOT below 100 ms in the failure group was relatively higher than that in the passing group. SPC can detect QA failure prior to over dosimetric QA tolerance levels. The acceptable tolerance range of each planning parameter may assist in the prediction of DQA failures using the SPC tool in the future.
목차
Ⅰ. Introduction
Ⅱ. Materials and methods
Ⅲ. Results
Ⅳ. Discussion
Ⅴ. Conclusion
REFERENCES
키워드
해당간행물 수록 논문
- 두부 측 방향 방사선검사 시 선원 영상수용체간 거리와 검사 자세 변화가 선량과 영상품질에 미치는 영향
- Feasibility on Statistical Process Control Analysis of Delivery Quality Assurance in Helical Tomotherapy
- Check Source를 이용한 HPGe감마핵종분석시스템의 자체흡수 보정방법 연구
- 방사선 전공 학생들을 대상으로 코로나 이후 수업 만족도 조사 연구
- 방사선치료학 전공의 온라인 학습 애플리케이션 학습효과 분석
- 코로나19 이후 음주수준에 영향을 미치는 요인분석
- 외국인 암 환자를 위한 국내 방사선치료 영문 텍스트 가독성 분석
- 자궁경부암 근접치료 시 선량 검증 프로그램을 통한 임상적 위험성 평가
참고문헌
관련논문
의약학 > 방사선과학분야 BEST
- 의료용 인공지능에 대한 동향 분석 및 방사선사 인식조사
- CT contrast 검사 시 중심 정맥관을 이용한 조영제 사용에 대한 연구
- CT조영제 부작용 고위험군에 대한 전처치의 유용성
의약학 > 방사선과학분야 NEW
- 대한CT영상기술학회지 제26권 제1호 목차
- 관상동맥 CT와 심근관류 CT 검사를 이용한 고농도 조영제와 저농도 조영제 간 비교 평가
- 관상동맥 CT 조영 검사 시, 초 고해상도 딥러닝 알고리즘이 적용된 스텐트 영상의 진단적 가치
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!