학술논문
Competence Level Analysis Through Maker Program Education
이용수 51
- 영문명
- 메이커 프로그램 교육을 통한 역량 수준 분석
- 발행기관
- 한국방사선학회
- 저자명
- 장현철 노미라 전병덕
- 간행물 정보
- 『한국방사선학회 논문지』제16권 제6호, 807~813쪽, 전체 7쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2022.11.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
4차 산업혁명 시대 창의 융합 인재 양성을 위해 대학에서는 지식 중심 교육에서 역량 중심의 교육으로 변화되고 있는 가운데 메이커 교육 프로그램은 새로운 교육 방법으로 관심을 받고 있다. 메이커 프로그램 교육을 통해 융합, 창의, 배려, 소통 역량에 대한 수준을 알아보고자 하였다. 대구시 소재 S 대학교 메이커 교육 프로그램에 참여한 방사선과 및 스포츠레저과 재학생 2, 3학년을 대상으로 2022년 5월 2일부터 5월 13일까지 설문조사를 실시하였다. 연구결과 융합 역량은 메이커 프로그램 교육 전 3.35 ± 0.78점, 교육 후 4.37 ± 0.61점, 창의 역량은 메이커 프로그램 교육 전 3.28 ± 0.78점, 교육 후 4.07 ± 0.69점, 배려 역량은 메이커 프로그램 교육 전 3.71 ± 0.80점, 교육 후 4.25 ± 0.64점, 소통 역량은 메이커 프로그램 교육 전 3.61 ± 0.70점, 교육 후 4.16 ± 0.63점으로 나타났다. 4개 역량 모두 교육 전과 비교 하였을 때 통계적으로 유의한 수준 차이가 있었으며, 교육 후 수준이 향상된 것으로 나타났다(p < 0.05). 메이커 교육 프로그램 운영을 통해 융합, 창의, 배려, 소통 역량 함양의 효과를 볼 수 있었다. 메이커 교육 프로그램은 4차 산업혁명 시대 창의융합 인재 양성을 위한 교육으로 볼 수 있으며, 더 많은 대학생들을 대상으로 다양한 메이커 교육 프로그램이 운영되어야 할 것으로 생각한다.
영문 초록
In order to foster creative convergence talents in the era of the 4th industrial revolution, universities are changing from knowledge-oriented education to competency-oriented education, and the maker education program is attracting attention as a new educational method. Through maker program education, we tried to find out the level of convergence, creativity, caring, and communication competencies. A survey was conducted from May 2nd to May 13th, 2022 for 2nd and 3rd grade students in the Department of Radiology and Sports and Leisure who participated in the Maker Education Program at S University in Daegu City. Research results Convergence competency is 3.35 ± 0.78 points before maker program education, 4.37 ± 0.61 points after education, creative competency is 3.28 ± 0.78 points before maker program education, 4.07 ± 0.69 points after education, and caring competency is 3.71 ± 0.80 points before maker program education Points, 4.25 ± 0.64 points after training, and communication competency were 3.61 ± 0.70 points before maker program training and 4.16 ± 0.63 points after training. There was a statistically significant level difference in all four competencies compared with before training, and the level after training was improved (p<0.05). Through the operation of the maker education program, it was possible to see the effect of cultivating convergence, creativity, caring, and communication competencies. The maker education program can be seen as education for nurturing creative convergence talents in the era of the 4th industrial revolution, and I think that various maker education programs should be operated for more university students.
목차
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Reference
해당간행물 수록 논문
- Improvement of High Permittivity Pads for Areas with Generally Low Signal Sensitivity at 7T MRI
- Verification of Balloon Catheter for Rectal Dose Reduction in Brachytherapy
- The Radioprotection Effect of Dioscorea Quinqueloba Extracts on the Prostate and Heart in Male Rats
- Analysis of the Effect of Entry-Level 3D Printer Materials on CT Images
- 한국방사선학회 논문지 제16권 제6호 목차
- Noise Measurement by Percentage of Effective Linear Attenuation Coefficient of Water in CT Imageof AAPM CT Performance Phantom
- Preliminary Test of 3D Printed Plastic Scintillators for Proton Beam
- Competence Level Analysis Through Maker Program Education
- An Analysis of Temperature Change and TI MI using Tissue Mimicking Phantom in Ultrasonic Examination
- Effect of Iterative-metal Artifact Reduction (iMAR) at Tomotherapy : a Phantom Study
- A Study on the Evaluation of Radiation Safety in Opened-Ceiling-Facilities for Radiography Testing
- Effect of Vertically Rising Pressure Providing Spinal Canal Segment Motion on Symptom Relief in Patients with Parkinson's Disease
- Efficacy Study of Osteradionecrosis Using Fibrin and SDF-1
- A Study on the Lead(Pb) Shield Thickness per Electron Beam Energy in Radiotherapy
- Two Layer DOI Detector Design for PET using Multiple Light Guides for Designing Light Distribution
- A Study on the Image of Radiological Technologists in Private Hospitals Perceived by University Students Majoring in Radiology
- Evaluation of Shielding Performance of 3D Printer Materials for High-energy Electron Radiation Therapy
- Deep Learning Applied Method for Acquisition of Digital Position Signal of PET Detector
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!