학술논문
Effect of Vertically Rising Pressure Providing Spinal Canal Segment Motion on Symptom Relief in Patients with Parkinson's Disease
이용수 21
- 영문명
- 척추관 분절운동을 제공하는 수직 상승 압력이 파킨슨병 환자의 증상 완화에 미치는 영향
- 발행기관
- 한국방사선학회
- 저자명
- 안도현 최현우 정경미 김나영 이종민
- 간행물 정보
- 『한국방사선학회 논문지』제16권 제6호, 787~797쪽, 전체 11쪽
- 주제분류
- 공학 > 기타공학
- 파일형태
- 발행일자
- 2022.11.30
4,120원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.
국문 초록
본 연구는 온열·마사지 자극이 가능한 기계식 침대 적용을 통해 척추를 수직으로 자극하여, 파킨슨병의 통증 감소 및 증상 완화를 확인하고자 하였다. 이를 위해 파킨슨병 환자를 대상으로 의료용 조합자극 침대를 사용함에 따른 척추의 분절운동을 확인한 후 시각아날로그척도, 요통 기능 장애, 보행 능력, 나선형 그리기 검사를 실시하고 해당 변수 간의 관계를 파악하였다. 10일간의 시각아날로그척도, 요통 기능 장애 평가에서 침대 사용 후 평균이 감소하는 경향을 확인하였다. 보행 능력은 이동 시간의 감소와 이동 거리의 증가를 관찰하였다. 나선형 그리기 검사에서 침대 사용 후 검사 시간의 평균이 전보다 유의하게 낮았다. 그 결과, 기계식 온열 및 마사지로 척추 분절운동이 발생함에 따른 파킨슨병 환자의 회복 및 통증 완화를 위한 보조적인 방법으로 사용할 수 있는 가능성을 제시하였다. 그러나 본 연구는 예비적 연구로 피험자수가 적어 향후 피험자수와 상태를 세부적으로 고려한 추가적 연구가 필요하다.
영문 초록
The purpose of this study was to confirm the reduction of pain and symptom relief of Parkinson's disease by vertically stimulating the spine through the application of a mechanical bed capable of thermal and massage stimulation. For this purpose, after confirming the segmental motion of the spine due to the use of a medical combination stimulation bed for Parkinson's disease patients, VAS, ODI, gait ability, and spiral drawing tests were performed, and the relationship between the variables was identified. In the 10-day visual analog scale and evaluation of low back pain dysfunction, the average trend of decreasing after bed use was confirmed. For walking ability, a decrease in the moving time and an increase in the moving distance were observed. In the spiral drawing test, the mean test time after using bed was significantly lower than before. As a result, it suggested the possibility of using it as an auxiliary method for recovery and pain relief of Parkinson's disease patients due to spinal segmental movement with mechanical heating and massage. However, this study is a preliminary study, and there is a small number of subjects, so additional research is needed that considers the number and condition of future subjects in detail.
목차
Ⅰ. INTRODUCTION
Ⅱ. MATERIAL AND METHODS
Ⅲ. RESULT
Ⅳ. DISCUSSION
Ⅴ. CONCLUSION
Acknowledgement
Reference
해당간행물 수록 논문
- Improvement of High Permittivity Pads for Areas with Generally Low Signal Sensitivity at 7T MRI
- Verification of Balloon Catheter for Rectal Dose Reduction in Brachytherapy
- The Radioprotection Effect of Dioscorea Quinqueloba Extracts on the Prostate and Heart in Male Rats
- Analysis of the Effect of Entry-Level 3D Printer Materials on CT Images
- 한국방사선학회 논문지 제16권 제6호 목차
- Noise Measurement by Percentage of Effective Linear Attenuation Coefficient of Water in CT Imageof AAPM CT Performance Phantom
- Preliminary Test of 3D Printed Plastic Scintillators for Proton Beam
- Competence Level Analysis Through Maker Program Education
- An Analysis of Temperature Change and TI MI using Tissue Mimicking Phantom in Ultrasonic Examination
- Effect of Iterative-metal Artifact Reduction (iMAR) at Tomotherapy : a Phantom Study
- A Study on the Evaluation of Radiation Safety in Opened-Ceiling-Facilities for Radiography Testing
- Effect of Vertically Rising Pressure Providing Spinal Canal Segment Motion on Symptom Relief in Patients with Parkinson's Disease
- Efficacy Study of Osteradionecrosis Using Fibrin and SDF-1
- A Study on the Lead(Pb) Shield Thickness per Electron Beam Energy in Radiotherapy
- Two Layer DOI Detector Design for PET using Multiple Light Guides for Designing Light Distribution
- A Study on the Image of Radiological Technologists in Private Hospitals Perceived by University Students Majoring in Radiology
- Evaluation of Shielding Performance of 3D Printer Materials for High-energy Electron Radiation Therapy
- Deep Learning Applied Method for Acquisition of Digital Position Signal of PET Detector
참고문헌
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!